Instruction Manual

Table Of Contents
Max. water temperature in suction mode:
20 °C
sample inspection
Length: 383 mm
Width: 380 mm
Maximum height: 981 mm
Minimum height: 792 mm
Length of high-pressure hose: 12 m
Weight (m) with accessory attached: 31 kg
Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
19.3 Extension Cords
If an extension cord is used, it must have a
ground wire and the wire gage of its conductors
must meet the following minimum requirements –
depending on the line voltage and length of the
extension cord:
If rated voltage on the rating label is 220V to
240V:
Cord length up to 20 m: AWG 15 / 1.5 mm²
Cord length 20 m up to 50 m: AWG 13 /
2.5 mm²
If rated voltage on the rating label is 100 V to
127 V:
Cord length up to 10 m: AWG 14 / 2.0 mm²
Cord length 10 m up to 30 m: AWG 12 /
3.5 mm²
19.4 Sound and vibration values RE
150 PLUS, 170 PLUS
The K value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2 dB(A). The K value for the vibration levels is
2 m/s².
Sound pressure level L
pA
measured according
to EN 60335‑2‑79:
71 dB(A)
Sound power level L
wA
measured according to
EN 60335‑2‑79:
85 dB(A)
Vibration level a
h
measured according to EN
60335‑2‑79, spray gun: 2.4 m/s².
19.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Spare Parts and Accesso‐
ries
20.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
21 Disposal
21.1 Disposing of the pressure
washer
Information concerning disposal is available from
any STIHL servicing dealer.
Dispose of the pressure washer, high-pres‐
sure hose, nozzles, accessories and packag‐
ing in accordance with the applicable regula‐
tions and in an environmentally responsible
manner.
22 EC Declaration of Con‐
formity
22.1 Pressure washers STIHL
RE 150 PLUS, 170 PLUS
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
Type: high-pressure washer
Manufacturer's brand: STIHL
RE RE 150 PLUS; 170 PLUS
Serial number: RE01
conforms to the specifications of Directives
2011/65/EU, 2006/42/EC and 2014/30/EU,
2009/125/EC and has been developed and built
in compliance with the versions of the following
standards valid at the production date:
EN 55014‑1, EN 55014‑2, EN 60335‑1,
EN 60335‑2‑79, EN 61000‑3‑2, EN 61000‑3‑11.
English 20 Spare Parts and Accessories
24 0458-663-0121-B