Operation Manual

RE 232, RE 272 PLUS, RE 282 PLUS
English
57
Cleaning the ventilation openings
The machine must be kept clean so that
cooling air can flow freely through the
openings in the machine.
Lubricating the connections
Lubricate the connections on the high-
pressure hose with multipurpose grease
as necessary.
Checking the machine supports
The two front machine supports must be
replaced if damaged or worn, to ensure
the stability of the machine.
Check oil level weekly and after
transport.
N Place the machine on a flat
horizontal surface
N Check that the oil level is between
the “min” and “max” marks. If it is
not, contact your servicing dealer.
STIHL recommends STIHL
servicing dealers
During long periods of storage, mineral
residue from the water may be
deposited in the pump. This may cause
the motor to start with difficulty or not at
all.
N Connect the machine to the water
supply and flush thoroughly with tap
water, leave the power cord
unplugged while doing so
N Plug the power plug into the wall
socket
N Switch on the machine with the
spray gun open
Checking the oil level
6158BA023 KN
max.
min.
First use after long periods of
storage