User Instructions

ENSK
21
TRHUSRHRCSLVLTROELBGETAZKK
0478 111 9841 B - EN
Detaching
● Detach the spark plug socket from the
engine.
● Detach recoil starter rope (2) from rope
guide (3).
7.6 Fuel and engine oil
Engine oil:
Please consult the engine
instruction manual for the type of
engine oil to be used and the oil capacity.
Check the oil filling level at regular
intervals (see engine instruction manual).
Avoid exceeding or falling below the
correct oil level.
Screw on the oil tank cap properly before
operating the engine.
Fuel:
Recommendation:
Fresh good quality fuels,
unleaded petrol.
Please consult the engine instruction
manual for details on the fuel quality
(octane rating).
8.1 Adjusting the mono
handlebar (RM 448 PC,
RM 448 TC, RM 448 VC)
Folding down handlebar:
Transport position (for cleaning, for
space-saving transport and for storage of
the machine):
● Detach the recoil starter rope from the
rope guide. (Ö 7.5)
● Hold the upper handlebar (2) with one
hand at its highest point and lift (relieve
load) slightly.
● Press the detent lever (1) downwards
and hold.
● Fold down handlebar (2) forwards.
Working position (to push machine):
● Fold the handlebar (2) up rearwards
and ensure that the handlebar is fully
engaged.
● Attach the recoil starter rope at the rope
guide. (Ö 7.5)
Height adjustment:
The height of the mono handlebar can be
adjusted to 2 levels:
● Hold the upper handlebar (2) with one
hand at its highest point and lift (relieve
load) slightly.
● Press the detent lever (1) downwards
and hold.
● Move the handlebar (2) into the
required position.
● Release the detent lever (1) and ensure
that the handlebar is again fully
engaged.
8.2 Folding down the dual
handlebar (RM 443, RM 443 T,
RM 448 PT, RM 448 T,
RM 448 TX)
Transport position (for cleaning, for
space-saving transport and for storage of
the machine):
● Detach the recoil starter rope from the
rope guide. (Ö 7.5)
● Open the quick-clamping devices (1) –
fold downwards – and fold down upper
handlebar (2) forwards.
Working position (to push machine):
● Fold up the upper handlebar (2)
rearwards and hold with one hand.
● Close quick-clamping devices (1) (fold
upwards).
Avoid damage to the machine
Top up engine oil before starting for
the first time. Use a suitable filling
aid when topping up the engine oil
and when refuelling (e.g. funnel).
7
8. Controls
Danger of pinching!
When actuating the detent lever,
always hold the upper handlebar
with one hand at its highest point.
Never place your fingers between
the handlebar and bracket (above
and below the detent lever).
8
Danger of pinching!
The upper handlebar can be folded
down by releasing the quick-
release caps. For this reason,
always hold the upper
handlebar (2) with one hand at its
highest point when you open the
quick-release caps.
9