Instruction Manual

ENES
19
PTNOSVFIDAELBGUK
0478 131 9841 B - EN
● Remove the battery from the battery
compartment. (Ö 7.2)
● Connecting the charger to the mains
(Ö 7.3)
● Insert the battery (1) into the guides on
the charger (2) and push it to the stop.
The LED on the charger (3) illuminates
green.
The LEDs on the battery (4) illuminate
green to indicate the charge state.
● When the LED on the charger (3) and
the LEDs on the battery (4) no longer
illuminate, remove the mains plug from
the socket.
The battery is fully charged.
● Remove battery from charger and insert
it in the battery compartment. (Ö 7.2)
7.5 LEDs on the battery
Displaying charge state:
● Press the button (1). The LEDs
illuminate green for approx. 5 seconds
to indicate the charge state.
● If the right LED flashes green, charge
the battery. (Ö 7.4)
Faults:
The LEDs indicate lawn mower or battery
faults. They can illuminate or flash red for
this purpose.
4 LEDs flash red:
The battery is faulty.
1 LED illuminates red:
The battery is too warm or too
cold.
3 LEDs illuminate red:
The lawn mower is
overheated
3 LEDs flash red:
The lawn mower is faulty.
● Remedy the faults. (Ö 19.)
7.6 LED on the charger
The LED (3) indicates the charger
status. It can illuminate green or
flash red.
The LED illuminates green
and the LEDs on the battery
illuminate or flash green:
The battery is charging.
The LED flashes red:
There is no electrical contact
between the battery and the
charger, or there is a fault in
the battery or in the charger.
If the LED illuminates green and 1 LED on
the battery illuminates red, the battery is
too warm or too cold.
● Remedy the faults. (Ö 19.)
8.1 Safety plug
The lawn mower can only be
operated when the safety plug is
inserted in the socket behind the battery
compartment.
● Lift up the battery compartment
cover (1) and hold in the open position.
● Removing:
Remove the safety plug (2) from the
socket (3) and keep separately from
lawn mower.
Inserting:
Press the safety plug (2) as far as it will
go into the socket (3).
● Close the battery compartment
cover (1).
8.2 Grass catcher box
Attaching:
● Open the discharge flap (1) and
hold it open.
9
7
8. Controls
Risk of injury!
The safety plug must be
removed prior to
performing any work on the
machine, particularly before
transport, maintenance or cleaning
work, as well as before inspecting
the machine. (Ö 4.)
The cover of the battery
compartment is held in the closed
position by two magnets.
10
11