Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Main Parts
- 4 Safety Symbols on the Products
- 5 IMPORTANT SAFETY INSTRUCTIONS
- 6 Battery Safety
- 7 Maintenance, Repair and Storage
- 8 Before Starting Work
- 9 Charging the Battery
- 10 LED Diagnostics
- 11 Assembling the Lawn Mower
- 12 Adjusting the Lawn Mower
- 13 Inserting and Removing the Fuse Key
- 14 Inserting and Removing the Battery
- 15 Switching the Lawn Mower On and Off
- 16 Activating and Deactivating Drive System
- 17 Checking the Lawn Mower
- 18 During Operation
- 19 After Finishing Work
- 20 Transporting the Lawn Mower and Battery
- 21 Storing the Lawn Mower and Battery
- 22 Cleaning
- 23 Inspection and Maintenance
- 24 Troubleshooting Guide
- 25 Specifications
- 26 Replacement Parts and Equipment
- 27 Disposal
- 1 Préface
- 2 Indications concernant la présente Notice d'emploi
- 3 Principales pièces
- 4 Symboles de sécurité sur les produits
- 5 CONSIGNES DE SÉCURITÉ IMPORTANTES
- 6 Sécurité de la batterie
- 7 Maintenance, réparation et rangement
- 8 Avant d'entreprendre le travail
- 9 Recharge de la batterie
- 10 Diagnostic à l'aide des DEL
- 11 Assemblage de la tondeuse à gazon
- 12 Réglage de la tondeuse à gazon
- 13 Insertion et retrait de la clé de fusible
- 14 Insertion et retrait de la batterie
- 15 Mise en marche et arrêt de la tondeuse à gazon
- 16 Activation et désactivation du système d'entraînement
- 17 Vérification de la tondeuse à gazon
- 18 Pendant l’utilisation
- 19 Après avoir terminé le travail
- 20 Transport de la tondeuse à gazon et de la batterie
- 21 Stockage de la tondeuse à gazon et de la batterie
- 22 Nettoyage
- 23 Inspection et maintenance
- 24 Guide de dépannage
- 25 Spécifications
- 26 Pièces de rechange et équipement
- 27 Élimination
0458-819-8221-A
35
English
23 Inspection and Maintenance
► Fit the washer (1) on the screw (2).
► Coat the screw with Loctite 243 or Loctite 242.
► Fit the new mowing blade (3) as depicted above. The
retainers must fit into the holes in the mowing blade.
► Screw in the screw (2) together with the washer.
► Use a piece of wood (4) to block the mowing blade (3).
► Firmly tighten down the screw.
3
2
1
0000-GXX-4793-A1
3
4
2
0000-GXX-5562-A0