Instruction Manual

Table Of Contents
0458-819-9921-A
15
English
7 Assembling the Lawn Mower
Open the discharge shield (1) and hold it in position.
Hold grass box (2) by the handle (3) and engage the
hooks (4) on the rod (5).
Rest the discharge shield (1) on the grass box (2).
7.2.2 Removing the Grass Box
Switch off the mower, remove the activation key and
battery.
Place the mower on a flat surface.
Open the discharge shield and hold it in position.
Hold grass box by the handle and lift it away.
Close the discharge shield.
7.3 Fitting and Removing the Mulch Plug
7.3.1 Fitting the Mulch Plug
Switch off the mower, remove the activation key and
battery.
Place the mower on a flat surface.
Open the discharge shield (1) and hold it in position.
Hold the mulch plug (2) by the grip (3) and fit it in the
discharge duct (4).
Close the discharge shield (1).
7.3.2 Removing the Mulch Plug
Switch off the mower, remove the activation key and
battery.
Place the mower on a flat surface.
Open the discharge shield and hold it in position.
Remove the mulch plug.
Close the discharge shield.
7.4 Fitting and Removing the Chute
7.4.1 Fitting the Chute
Switch off the mower, remove the activation key and
battery.
Place the mower on a flat surface.
Open the side discharge shield (1) and hold it in position.
Engage hooks (2) on the shaft (4) from below.
Rest the side discharge shield (1) on the chute (3).
7.4.2 Removing the Chute
Switch off the mower, remove the activation key and
battery.
Place the mower on a flat surface.
4
32
1
0000-GXX-7751-A0
2
4
1
3
0000-GXX-4635-A0