Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Main Parts
- 4 Safety Symbols on the Products
- 5 IMPORTANT SAFETY INSTRUCTIONS
- 6 Battery Safety
- 7 Maintenance, Repair and Storage
- 8 Before Starting Work
- 9 Charging the Battery
- 10 LED Diagnostics
- 11 Assembling the Lawn Mower
- 12 Adjusting the Lawn Mower
- 13 Inserting and Removing the Fuse Key
- 14 Inserting and Removing the Battery
- 15 Switching the Lawn Mower On and Off
- 16 Activating and Deactivating Drive System
- 17 Checking the Lawn Mower
- 18 During Operation
- 19 After Finishing Work
- 20 Transporting the Lawn Mower and Battery
- 21 Storing the Lawn Mower and Battery
- 22 Cleaning
- 23 Inspection and Maintenance
- 24 Troubleshooting Guide
- 25 Specifications
- 26 Replacement Parts and Equipment
- 27 Disposal
- 28 Limited Warranty
- 29 Trademarks
- 30 Addresses
- 1 Introducción
- 2 Acerca de este manual de instrucciones
- 3 Componentes importantes
- 4 Símbolos de seguridad en los productos
- 5 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- 6 Seguridad de la batería
- 7 Mantenimiento, reparación y almacenamiento
- 8 Antes de empezar a trabajar
- 9 Carga de la batería
- 10 Diagnóstico de LED
- 11 Armado del cortacéspedes –
- 12 Ajuste del cortacéspedes –
- 13 Colocación y retiro de las llave fusible
- 14 Colocación y extracción de la batería.
- 15 Encendido y apagado del cortacéspedes
- 16 Activación y desactivación del sistema de propulsión
- 17 Comprobación del cortacéspedes
- 18 Durante el funcionamiento
- 19 Después de completar el trabajo
- 20 Transporte del cortacéspedes y de la batería
- 21 Almacenamiento del cortacéspedes y de la batería
- 22 Limpieza
- 23 Inspección y mantenimiento
- 24 Guía de solución de problemas
- 25 Especificaciones
- 26 Piezas y equipos de repuesto
- 27 Eliminación
- 28 Garantía limitada
- 29 Marcas comerciales
- 30 Direcciones
0458-819-8621-A
21
English
11 Assembling the Lawn Mower
► Align the upper part (1) and lower part (2) of the handle so
that the pin (4) engages into the bore (3) on both sides.
► Insert the screw (5) and align it so that the screw head is
flush with the lower part of the handle on both sides.
► Screw on the star knob nut (6).
► Press the cable (7) into the holder (8) on both sides.
11.2 Mounting and Removing the Grass Bag
11.2.1 Mounting the Grass Bag
To mount the grass bag:
► Switch off the lawn mower and wait for the cutting blade to
come to a complete stop, @ 15.2.
► Position the lawn mower on a level surface.
► If the side discharge cover is still mounted, remove it.
► If the mulch insert plug is still mounted, remove it.
► Open the rear discharge cover (1) and hold it in position.
► Hold grass bag (2) by its handle (3) and engage the
hooks (4) on the rod (5).
► Close the rear discharge cover.
11.2.2 Removing the Grass Bag
To remove the grass bag:
► Switch off the lawn mower and wait for the cutting blade to
come to a complete stop, @ 15.2.
► Position the lawn mower on a level surface.
► Open the rear discharge cover and hold it in position.
► Hold grass bag by its handle and unhook it upwards.
► Close the rear discharge cover.
11.3 Inserting and Removing the Mulch Insert
11.3.1 Installing the Mulch Insert
To install the mulch insert:
► Switch off the lawn mower, @ 15.2.
► Remove the fuse key and battery, @ 13.2 and @ 14.2.
► Position the lawn mower on a level surface.
► Open the rear discharge cover (1) and hold it in position.
► Hold the mulch insert (2) by the handle (3) and fit it
securely in the rear discharge chute (4).
► Close the rear discharge cover.
11.3.2 Removing the Mulch Insert
To remove the mulch insert:
► Switch off the lawn mower, @ 15.2.
► Remove the fuse key and battery, @ 13.2 and @ 14.2.
► Position the lawn mower on a level surface.
► Open the rear discharge cover and hold it in position.
► Grip the mulch insert by the handle and take it out of the
rear discharge chute.
► Close the rear discharge cover.
3
2
4
5
1
0000-GXX-4634-A0
4
32
1
0000-GXX-7751-A0