Instruction Manual

0478 121 9804 B - EN
20
– Incorrect electrical connection
(voltage),
– Product modifications not approved by
STIHL.
– The use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality.
– Improper use of the product.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots),
– corrosion and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal (Ö 4.9).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.
Mowing blade:
6311 702 0100
Blade fastening screw:
9018 321 1800
Coupler:
6311 702 0600
16.1 EU declaration of conformity –
STIHL RME 235.0 lawn mower
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: electric lawn mower
– manufacturer's brand: STIHL
– type: RME 235.0
– cutting width: 33 cm
– serial number: 6311
complies with the relevant provisions of
Directives 2006/42/EC, 2000/14/EC,
2014/30/EU and 2011/65/EU and has
been developed and manufactured in
accordance with the versions of the
following standards valid on the date of
manufacture: EN 60335-1, EN 60335-2-
77, EN 55014-1, EN 55014-2, EN 61000-
3-2 and EN 61000-3-3.
Notified body involved:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
90431 Nuremberg, Germany
The measured and guaranteed sound
power levels were determined in
accordance with Directive 2000/14/EC,
Appendix VIII.
14. Environmental protection
15. Standard spare parts
The blade fastening screw and
coupler must be renewed when the
blade is replaced. Spare parts are
available from a STIHL specialist
dealer.
16. Declaration of conformity