User Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Zu Ihrer Sicherheit
- 5. Symbolbeschreibung
- 6. Lieferumfang
- 7. Arbeiten vor der Erstinbetriebnahme
- 8. Bedienelemente
- 8.1 Zündschloss
- 8.2 Gashebel mit Choke-Funktion
- 8.3 Schalter Mähwerk
- 8.4 Sicherheitsschalter Rückwärtsmähen
- 8.5 Hebel Fahrtrichtungswahl
- 8.6 Lenkrad
- 8.7 Hebel Fahrersitzverstellung
- 8.8 Antriebspedal
- 8.9 Bremspedal
- 8.10 Parkbremse
- 8.11 Hebel Schnitthöhenverstellung
- 8.12 Hebel Grasfangkorbentleerung
- 8.13 Bügel Grasfangkorbentriegelung
- 8.14 Bügel Getriebefreilauf
- 8.15 Füllstandssensor (Grasfangkorb)
- 9. Elektronik
- 10. Hinweise zum Arbeiten
- 11. Sicherheitseinrichtungen
- 12. Gerät in Betrieb nehmen
- 12.1 Kraftstoff einfüllen
- 12.2 Verbrennungsmotor starten
- 12.3 Verbrennungsmotor abstellen
- 12.4 Fahren
- 12.5 Bremsen
- 12.6 Schnitthöhe einstellen
- 12.7 Mähen
- 12.8 Automatisches Auskuppeln des Mähwerks programmieren
- 12.9 Grasfangkorb entleeren
- 12.10 Grasfangkorb abnehmen und einhängen
- 12.11 Ziehen von Lasten
- 12.12 Betrieb an Hanglagen
- 12.13 Orientierungshilfe
- 13. Mähwerk
- 14. Wartung
- 14.1 Wartungsplan
- 14.2 Gerät reinigen
- 14.3 Füllstandssensor (Grasfangkorb) reinigen
- 14.4 Sicherheitseinrichtungen kontrollieren
- 14.5 Auswurfkanal demontieren
- 14.6 Auswurfkanal montieren
- 14.7 Mähmesser warten
- 14.8 Einbaulage des Mähwerks kontrollieren
- 14.9 Reifendruck
- 14.10 Räder wechseln
- 14.11 Ablagefach öffnen und schließen
- 14.12 Abdeckung des Verbrennungsmotors
- 14.13 Füllstand des Motoröls kontrollieren
- 14.14 Motorölwechsel
- 14.15 Kraftstoffhahn
- 14.16 Abdeckung Lenksäule demontieren
- 14.17 Abdeckung Lenksäule montieren
- 14.18 Sicherungen
- 14.19 Batterie ab- und anklemmen
- 14.20 Batterie aus- und einbauen
- 14.21 Batterie laden
- 14.22 Schmieren
- 14.23 Verbrennungsmotor
- 14.24 Getriebe
- 14.25 Aufbewahrung
- 14.26 Stilllegung bei längeren Pausen (z. B. Winterpause)
- 14.27 Nach längeren Pausen (z.B. Winterpause)
- 15. Transport
- 16. Übliche Ersatzteile
- 17. Zubehör
- 18. Umweltschutz
- 19. Verschleiß minimieren und Schäden vermeiden
- 20. Konformitätserklärung
- 21. Technische Daten
- 22. Fehlersuche
- 23. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Operations prior to initial use
- 8. Controls
- 8.1 Ignition lock
- 8.2 Throttle lever with choke function
- 8.3 Mowing deck switch
- 8.4 Reverse mowing safety switch
- 8.5 Driving direction selector lever
- 8.6 Steering wheel
- 8.7 Driver's seat adjustment lever
- 8.8 Drive pedal
- 8.9 Brake pedal
- 8.10 Parking brake
- 8.11 Cutting height adjustment lever
- 8.12 Grass catcher box emptying lever
- 8.13 Grass catcher box release lever
- 8.14 Gearbox freewheel lever
- 8.15 Level sensor (grass catcher box)
- 9. Electronics
- 10. Notes on working with the machine
- 11. Safety devices
- 12. Operating the machine
- 12.1 Filling the fuel tank
- 12.2 Starting the engine
- 12.3 Stopping the engine
- 12.4 Driving
- 12.5 Braking
- 12.6 Adjusting the cutting height
- 12.7 Mowing
- 12.8 Programming automatic disengagement of the mowing deck
- 12.9 Emptying the grass catcher box
- 12.10 Removing and attaching the grass catcher box
- 12.11 Pulling loads
- 12.12 Operating on slopes
- 12.13 Guide
- 13. Mowing deck
- 14. Maintenance
- 14.1 Maintenance schedule
- 14.2 Cleaning the machine
- 14.3 Cleaning the level sensor (grass catcher box)
- 14.4 Checking the safety devices
- 14.5 Removing the discharge chute
- 14.6 Installing the discharge chute
- 14.7 Mowing blade maintenance
- 14.8 Checking the installation position of the mowing deck
- 14.9 Tyre pressure
- 14.10 Changing the wheels
- 14.11 Opening and closing the storage compartment
- 14.12 Engine cover
- 14.13 Checking the engine oil filling level
- 14.14 Changing the engine oil
- 14.15 Fuel cock
- 14.16 Removing the steering column cover
- 14.17 Installing the steering column cover
- 14.18 Fuses
- 14.19 Disconnecting and connecting the battery
- 14.20 Removing and installing the battery
- 14.21 Charging the battery
- 14.22 Lubrication
- 14.23 Combustion engine
- 14.24 Gearbox
- 14.25 Storage
- 14.26 Extended periods of inoperation (e.g. winter break)
- 14.27 Following storage for extended periods (e.g. over winter)
- 15. Transport
- 16. Standard spare parts
- 17. Accessories
- 18. Environmental protection
- 19. Minimising wear and preventing damage
- 20. Declaration of conformity
- 21. Technical specifications
- 22. Troubleshooting
- 23. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Consignes de sécurité
- 4.1 Généralités
- 4.2 Formation – Apprendre à utiliser l’appareil
- 4.3 Transport du tracteur de pelouse
- 4.4 Plein de carburant – Manipulation de l’essence
- 4.5 Vêtements et équipement appropriés
- 4.6 Avant tout travail
- 4.7 Pendant l'utilisation de l'appareil
- 4.8 Entretien et réparations
- 4.9 Stockage prolongé
- 4.10 Mise au rebut
- 5. Signification des pictogrammes
- 6. Contenu de l’emballage
- 7. Travaux avant la première mise en service
- 8. Éléments de commande
- 8.1 Serrure de contact
- 8.2 Levier des gaz avec fonction de starter
- 8.3 Interrupteur du plateau de coupe
- 8.4 Interrupteur de sécurité pour tonte en marche en arrière
- 8.5 Levier de sélection du sens de la marche
- 8.6 Volant
- 8.7 Levier de réglage du siège du conducteur
- 8.8 Pédale d’entraînement
- 8.9 Pédale de frein
- 8.10 Frein de stationnement
- 8.11 Levier de réglage de la hauteur de coupe
- 8.12 Levier de vidage du bac de ramassage
- 8.13 Arceau de déverrouillage du bac de ramassage
- 8.14 Tige de débrayage du boîtier de transmission
- 8.15 Capteur de niveau de remplissage (bac de ramassage)
- 9. Système électronique
- 10. Conseils d’utilisation
- 11. Dispositifs de sécurité
- 12. Mise en service de l’appareil
- 12.1 Plein de carburant
- 12.2 Démarrage du moteur à combustion
- 12.3 Coupure du moteur à combustion
- 12.4 Conduite
- 12.5 Freinage
- 12.6 Réglage de la hauteur de coupe
- 12.7 Tondre
- 12.8 Programmation du débrayage automatique du plateau de coupe
- 12.9 Vidage du bac de ramassage
- 12.10 Décrochage et accrochage du bac de ramassage
- 12.11 Remorquage de charges
- 12.12 Tonte sur des terrains en pente
- 12.13 Assistant d’orientation
- 13. Plateau de coupe
- 14. Entretien
- 14.1 Plan d’entretien
- 14.2 Nettoyage de l’appareil
- 14.3 Nettoyage du capteur de niveau de remplissage (bac de ramassage)
- 14.4 Contrôle des dispositifs de sécurité
- 14.5 Démontage du canal d’éjection
- 14.6 Montage du canal d’éjection
- 14.7 Entretien de la lame de coupe
- 14.8 Contrôle de la position de montage du plateau de coupe
- 14.9 Pression de gonflage
- 14.10 Remplacement des roues
- 14.11 Ouverture et fermeture du compartiment de rangement
- 14.12 Capot du moteur à combustion
- 14.13 Contrôle du niveau de remplissage d’huile moteur
- 14.14 Vidange d’huile moteur
- 14.15 Robinet d’alimentation en carburant
- 14.16 Démontage du cache de colonne de direction
- 14.17 Montage du cache de colonne de direction
- 14.18 Fusibles
- 14.19 Débranchement et branchement de la batterie
- 14.20 Dépose et repose de la batterie
- 14.21 Recharge de la batterie
- 14.22 Graissage
- 14.23 Moteur à combustion
- 14.24 Transmission
- 14.25 Rangement de l’appareil
- 14.26 Hivernage
- 14.27 Après une longue période d’inutilisation (hivernage)
- 15. Transport
- 16. Pièces de rechange courantes
- 17. Accessoires
- 18. Protection de l’environnement
- 19. Comment limiter l’usure et éviter les dommages
- 20. Déclaration de conformité
- 21. Caractéristiques techniques
- 22. Recherche des pannes
- 23. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Voor uw veiligheid
- 5. Toelichting van de symbolen
- 6. Leveringsomvang
- 7. Werkzaamheden vóór de eerste ingebruikname
- 8. Bedieningselementen
- 8.1 Contactslot
- 8.2 Gashendel met chokefunctie
- 8.3 Schakelaar maaiwerk
- 8.4 Veiligheidsschakelaar achteruit maaien
- 8.5 Keuzehendel rijrichting
- 8.6 Stuurwiel
- 8.7 Verstelhendel bestuurdersstoel
- 8.8 Aandrijfpedaal
- 8.9 Rempedaal
- 8.10 Handrem
- 8.11 Hendel snijhoogteverstelling
- 8.12 Hendel voor ledigen grasopvangbox
- 8.13 Ontgrendelhendel grasopvangbox
- 8.14 Hendel voor vrijloop transmissie
- 8.15 Peilindicator (grasopvangbox)
- 9. Elektronica
- 10. Aanwijzingen voor werken
- 11. Veiligheidsvoorzieningen
- 12. Apparaat in gebruik nemen
- 12.1 Brandstof bijtanken
- 12.2 Verbrandingsmotor starten
- 12.3 Verbrandingsmotor uitschakelen
- 12.4 Rijden
- 12.5 Remmen
- 12.6 Snijhoogte instellen
- 12.7 Maaien
- 12.8 Programmeren van het automatisch ontkoppelen van het maaiwerk
- 12.9 Grasopvangbox ledigen
- 12.10 Grasopvangbox wegnemen en vasthaken
- 12.11 Trekken van lasten
- 12.12 Gebruik op hellingen
- 12.13 Oriëntatiehulp
- 13. Maaiwerk
- 14. Onderhoud
- 14.1 Onderhoudsschema
- 14.2 Apparaat reinigen
- 14.3 Peilindicator (grasopvangbox) reinigen
- 14.4 Veiligheidsvoorzieningen controleren
- 14.5 Uitwerpkanaal demonteren
- 14.6 Uitwerpkanaal monteren
- 14.7 Maaimes onderhouden
- 14.8 Inbouwpositie van het maaiwerk controleren
- 14.9 Bandenspanning
- 14.10 Wielen vervangen
- 14.11 Opbergvak openen en sluiten
- 14.12 Afdekking van de verbrandingsmotor
- 14.13 Inhoud van de motorolie controleren
- 14.14 Motorolie verversen
- 14.15 Brandstofkraan
- 14.16 Afdekking van de stuurkolom demonteren
- 14.17 Afdekking stuurkolom monteren
- 14.18 Zekeringen
- 14.19 Accu loskoppelen en aansluiten
- 14.20 Accu uit- en inbouwen
- 14.21 Accu laden
- 14.22 Smeren
- 14.23 Verbrandingsmotor
- 14.24 Transmissie
- 14.25 Opslag
- 14.26 Stilleggen bij langere onderbrekingen (bijvoorbeeld winterpauze)
- 14.27 Na langere bedrijfspauzes (bijv. winterpauze)
- 15. Transport
- 16. Standaard reserveonderdelen
- 17. Accessoires
- 18. Milieubescherming
- 19. Slijtage minimaliseren en schade voorkomen
- 20. Conformiteitsverklaring
- 21. Technische gegevens
- 22. Defectopsporing
- 23. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Per la vostra sicurezza
- 4.1 Informazioni generali
- 4.2 Training – Apprendere l'uso dell'apparecchio
- 4.3 Trasporto del trattorino da giardino
- 4.4 Fare rifornimento - Trattamento della benzina
- 4.5 Abbigliamento ed equipaggiamento
- 4.6 Prima dell'uso
- 4.7 Durante il lavoro
- 4.8 Manutenzione e riparazioni
- 4.9 Rimessaggio durante periodi di non utilizzo prolungati
- 4.10 Smaltimento
- 5. Descrizione dei simboli
- 6. Equipaggiamento fornito
- 7. Lavori da eseguire prima della prima messa in servizio
- 8. Elementi di comando
- 8.1 Blocchetto d’avviamento
- 8.2 Leva acceleratore con funzione di accensione e avviamento a freddo
- 8.3 Interruttore apparato di taglio
- 8.4 Interruttore di sicurezza taglio in retromarcia
- 8.5 Leva direzione di marcia
- 8.6 Volante
- 8.7 Leva di regolazione sedile di guida
- 8.8 Pedale frizione
- 8.9 Pedale del freno
- 8.10 Freno di parcheggio
- 8.11 Leva di regolazione dell'altezza di taglio
- 8.12 Leva svuotamento cesto di raccolta erba
- 8.13 Staffa di sbloccaggio cesto di raccolta erba
- 8.14 Staffa dispositivo di trasmissione a ruota libera
- 8.15 Sensore livello di riempimento (cesto raccolta erba)
- 9. Sistema elettronico
- 10. Istruzioni di lavoro
- 11. Dispositivi per la sicurezza
- 12. Messa in servizio dell'apparecchio
- 12.1 Rifornimento di carburante
- 12.2 Avviamento del motore a combustione
- 12.3 Spegnimento del motore a combustione
- 12.4 Guida
- 12.5 Frenata
- 12.6 Regolazione dell'altezza di taglio
- 12.7 Taglio
- 12.8 Programmazione del disinnesto automatico dell'apparato di taglio
- 12.9 Svuotamento del cesto di raccolta erba
- 12.10 Stacco e attacco del cesto di raccolta erba
- 12.11 Traino di carichi
- 12.12 Funzionamento su terreni in pendenza
- 12.13 Aiuto all'orientamento
- 13. Apparato di taglio
- 14. Manutenzione
- 14.1 Piano di manutenzione
- 14.2 Pulizia apparecchio
- 14.3 Pulizia sensore livello di riempimento (cesto raccolta erba)
- 14.4 Controllo dispositivi per la sicurezza
- 14.5 Smontaggio del canale di scarico
- 14.6 Montaggio del canale di scarico
- 14.7 Manutenzione della lama
- 14.8 Controllo della posizione di montaggio dell'apparato di taglio
- 14.9 Pressione di gonfiaggio pneumatici
- 14.10 Sostituzione delle ruote
- 14.11 Apertura e chiusura vano portaoggetti
- 14.12 Copertura del motore a combustione
- 14.13 Controllo del livello di riempimento dell'olio motore
- 14.14 Sostituzione dell'olio motore
- 14.15 Rubinetto del carburante
- 14.16 Smontaggio della copertura del piantone dello sterzo
- 14.17 Montaggio della copertura del piantone dello sterzo
- 14.18 Fusibili
- 14.19 Stacco e attacco della batteria
- 14.20 Montaggio e smontaggio della batteria
- 14.21 Carica della batteria
- 14.22 Lubrificazione
- 14.23 Motore a combustione
- 14.24 Cambio
- 14.25 Rimessaggio
- 14.26 Arresto prolungato dell'apparecchio (p. e. pausa invernale)
- 14.27 Dopo pause prolungate (p. es. pausa invernale)
- 15. Trasporto
- 16. Ricambi standard
- 17. Accessori
- 18. Tutela dell’ambiente
- 19. Minimizzare l’usura ed evitare danni
- 20. Dichiarazione di conformità
- 21. Dati tecnici
- 22. Risoluzione guasti
- 23. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Descripción del equipo
- 4. Para su seguridad
- 4.1 Información general
- 4.2 Formación: aprender el uso del equipo
- 4.3 Transporte del tractor cortacésped
- 4.4 Repostaje: manipulación de gasolina
- 4.5 Ropa y equipamiento de trabajo
- 4.6 Antes del trabajo
- 4.7 Durante el trabajo
- 4.8 Mantenimiento y reparaciones
- 4.9 Almacenamiento durante largos periodos de inactividad
- 4.10 Eliminación
- 5. Descripción de los símbolos
- 6. Contenido del suministro
- 7. Tareas a realizar antes de la primera puesta en servicio
- 8. Elementos de mando
- 8.1 Contacto de encendido
- 8.2 Acelerador con estárter
- 8.3 Interruptor equipo de corte
- 8.4 Interruptor de seguridad para corte en marcha atrás
- 8.5 Palanca selectora de la dirección de marcha
- 8.6 Volante
- 8.7 Palanca de regulación del asiento del conductor
- 8.8 Pedal de tracción
- 8.9 Pedal del freno
- 8.10 Freno de estacionamiento
- 8.11 Palanca de ajuste de la altura de corte
- 8.12 Palanca de vaciado del recogedor de hierba
- 8.13 Palanca de desbloqueo del recogedor de hierba
- 8.14 Palanca de (des)acoplamiento de la caja de cambios
- 8.15 Sensor de nivel de llenado (recogedor de hierba)
- 9. Sistema electrónico
- 10. Indicaciones para el trabajo
- 11. Dispositivos de seguridad
- 12. Poner el equipo en servicio
- 12.1 Repostar combustible
- 12.2 Arrancar el motor de combustión
- 12.3 Apagar el motor de combustión
- 12.4 Desplazamiento
- 12.5 Frenar
- 12.6 Ajustar la altura de corte
- 12.7 Corte
- 12.8 Programación del desacoplamiento automático del equipo de corte
- 12.9 Vaciar el recogedor de hierba
- 12.10 Retirar y enganchar el recogedor de hierba
- 12.11 Remolcar cargas
- 12.12 Servicio en pendientes
- 12.13 Orientación asistida
- 13. Equipo de corte
- 14. Mantenimiento
- 14.1 Plan de mantenimiento
- 14.2 Limpiar el equipo
- 14.3 Limpiar el sensor de nivel de llenado (recogedor de hierba)
- 14.4 Verificar los dispositivos de seguridad
- 14.5 Desmontar el canal de expulsión
- 14.6 Montar el canal de expulsión
- 14.7 Mantenimiento de las cuchillas
- 14.8 Verificar la posición de montaje del equipo de corte
- 14.9 Presión de los neumáticos
- 14.10 Cambiar las ruedas
- 14.11 Abrir y cerrar la bandeja
- 14.12 Cubierta del motor de combustión
- 14.13 Controlar el nivel de llenado de aceite del motor
- 14.14 Cambio de aceite del motor
- 14.15 Paso de combustible
- 14.16 Desmontar la cubierta de la columna de dirección
- 14.17 Montar la cubierta de la columna de dirección
- 14.18 Fusibles
- 14.19 Desembornar y embornar la batería
- 14.20 Desmontar y montar la batería
- 14.21 Cargar la batería
- 14.22 Engrasar
- 14.23 Motor de combustión
- 14.24 Caja de cambios
- 14.25 Almacenamiento
- 14.26 Parada durante largos periodos de inactividad (por ejemplo, en invierno)
- 14.27 Tras largos periodos de inactividad (por ejemplo, en invierno)
- 15. Transporte
- 16. Piezas de recambio habituales
- 17. Accesorios
- 18. Protección del medio ambiente
- 19. Reducir el desgaste y prevenir daños
- 20. Declaración de conformidad
- 21. Datos técnicos
- 22. Localización de anomalías
- 23. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Descrição do aparelho
- 4. Para sua segurança
- 4.1 Generalidades
- 4.2 Formação – Aprender a utilizar o aparelho
- 4.3 Transporte do trator corta-relva
- 4.4 Abastecer – Manuseamento da gasolina
- 4.5 Vestuário e equipamento
- 4.6 Antes dos trabalhos
- 4.7 Durante o trabalho
- 4.8 Manutenção e reparações
- 4.9 Armazenamento no caso de períodos de paragem mais longos
- 4.10 Eliminação
- 5. Descrição de símbolos
- 6. Fornecimento
- 7. Trabalhos a realizar antes da primeira colocação em funcionamento
- 8. Elementos de comando
- 8.1 Fecho da ignição
- 8.2 Alavanca do acelerador com função Choke
- 8.3 Interrutor do mecanismo de corte
- 8.4 Interrutor de segurança do corte em marcha-atrás
- 8.5 Alavanca da seleção do sentido de marcha
- 8.6 Volante
- 8.7 Alavanca de ajuste do assento do condutor
- 8.8 Pedal de acionamento
- 8.9 Pedal do travão
- 8.10 Travão de estacionamento
- 8.11 Alavanca do ajuste da altura de corte
- 8.12 Alavanca de esvaziamento da cesta de recolha de relva
- 8.13 Arco de desbloqueio da cesta de recolha de relva
- 8.14 Arco do funcionamento livre da transmissão
- 8.15 Sensor do nível de enchimento (cesta de recolha de relva)
- 9. Sistema eletrónico
- 10. Instruções para trabalhar
- 11. Dispositivos de segurança
- 12. Colocar o aparelho em funcionamento
- 12.1 Encher com combustível
- 12.2 Ligar o motor de combustão
- 12.3 Desligar o motor de combustão
- 12.4 Conduzir
- 12.5 Travar
- 12.6 Ajustar a altura de corte
- 12.7 Cortar a relva
- 12.8 Programar o desacoplamento automático do mecanismo de corte
- 12.9 Esvaziar a cesta de recolha de relva
- 12.10 Remover e engatar a cesta de recolha da relva
- 12.11 Puxar cargas
- 12.12 Utilização em encostas
- 12.13 Auxiliar de orientação
- 13. Mecanismo de corte
- 14. Manutenção
- 14.1 Plano de manutenção
- 14.2 Limpar o aparelho
- 14.3 Limpar o sensor do nível de enchimento (cesta de recolha de relva)
- 14.4 Controlar os dispositivos de segurança
- 14.5 Desmontar o canal de expulsão
- 14.6 Montar o canal de expulsão
- 14.7 Manutenção da lâmina de corte
- 14.8 Verificar a posição de montagem do mecanismo de corte
- 14.9 Pressão dos pneus
- 14.10 Substituir as rodas
- 14.11 Abrir e fechar o espaço de arrumo
- 14.12 Cobertura do motor de combustão
- 14.13 Verificar o nível de enchimento do óleo do motor
- 14.14 Mudança de óleo do motor
- 14.15 Torneira do combustível
- 14.16 Desmontar a cobertura da coluna da direção
- 14.17 Montar a cobertura da coluna da direção
- 14.18 Fusíveis
- 14.19 Desligar e ligar a bateria
- 14.20 Montar e desmontar a bateria
- 14.21 Carregar a bateria
- 14.22 Lubrificar
- 14.23 Motor de combustão
- 14.24 Transmissão
- 14.25 Arrumação
- 14.26 Imobilização no caso de paragens mais longas (por exemplo, período de inverno)
- 14.27 Após pausas mais longas (por exemplo, período de inverno)
- 15. Transporte
- 16. Peças de reposição comuns
- 17. Acessórios
- 18. Proteção do meio ambiente
- 19. Minimização do desgaste e prevenção de danos
- 20. Declaração de conformidade
- 21. Dados técnicos
- 22. Localização de falhas
- 23. Plano de manutenção
0478 193 9905 C - EN
68
– for transporting clippings, except in the
grass catcher box intended for this
purpose.
The machine is not approved for use on
public roads.
The carrying of persons (especially
children) and animals is not permitted.
Never climb onto the mowing deck, and in
particular the gauge wheels.
Objects must not be transported on the
machine, but only with the aid of a trailer
approved by STIHL (accessory). The
weight limits must be observed. (Ö 12.11)
Particular care is required during use in
public green spaces, parks, sports fields,
along roads and in agricultural and forestry
businesses.
The machine must not be used for sporting
or competitive events.
For safety reasons, any modification to the
machine, except the proper installation of
accessories or attachments approved by
STIHL is forbidden and results in voiding of
the warranty cover. Information regarding
approved accessories and attachments
can be obtained from your STIHL
specialist dealer.
In particular, any tampering with the
machine which increases the power
output, engine speed or driving speed is
forbidden.
The machine is equipped with electronics
which must not be modified or removed.
For safety reasons, the machine software
must never be modified or tampered with.
Caution! Danger to health due
to vibrations. Excessive
exposure to vibrations can
result in damage to the
cardiovascular or nervous system,
particularly in persons with cardiovascular
problems. Please consult a physician if
you experience symptoms that may have
been caused by vibrational loads.
Symptoms of this kind principally affect the
fingers, hands or wrists and include
(incomplete list):
– numbness,
–pain,
– muscular weakness,
– skin discolouration,
– unpleasant tingling sensation.
Hold the handlebar tightly, but not tensed,
with both hands in the designated
locations during operation.
Plan your working times so that more
severe physical strains over a longer
period are avoided.
4.2 Training – learning to use the
machine
Make sure that you are familiar with the
controls and operation of the machine. In
particular, the user must know how the
work tools and engine can be stopped
quickly.
The machine must only be used by
persons who have read the instruction
manual and are familiar with operation of
the machine. The user should seek expert
and practical instruction prior to initial
operation. The user must receive
instruction on safe use of the machine
from the vendor or another expert.
During this instruction, the user should be
made aware
– that the utmost care and concentration
are required for working with the
machine.
– that a ride-on mower which is sliding
down a slope cannot be brought under
control by applying the brake.
The main causes for the loss of control
over the ride-on mower include:
– inadequate adhesion of the wheels,
– driving too fast,
– inappropriate braking,
– incorrect use (sport events, etc.),
– inadequate knowledge of the effects
associated with ground conditions,
especially on slopes (see section "For
your safety", "Working on slopes"),
– incorrect attachment of loads and poor
load distribution.
Residual risks persist even if you operate
the machine according to the instructions.
4.3 Transporting the ride-on mower
On account of its own weight, the ride-on
mower can cause severe crush injuries.
Particular care must be taken when
loading or unloading the ride-on mower
onto/from a vehicle or trailer for transport
purposes.
This ride-on mower must not be towed. For
transporting on public roads, a suitable
vehicle or a suitable trailer must be used.
During transport, secure the ride-on
mower to a load floor as described in this
instruction manual. Always engage the
parking brake. (Ö 15.)