User Manual

79
DEFRNLITESPT EN
0478 193 9905 C - EN
1 With your left hand, lift and hold driver's
seat adjustment lever (1).
2 Move driver's seat (2) to the required
position. Then release the driver's seat
adjustment lever again and allow it to
engage.
8.8 Drive pedal
The driving speed can be
continuously regulated via the
drive pedal.
Stopping:
Take foot off the drive pedal (self-
propulsion) (1).
Reducing the driving speed:
Reduce pressure on the drive
pedal (1).
Increasing driving speed:
Press down drive pedal (1).
8.9 Brake pedal
The machine can be braked when driving
and can be blocked at a standstill via the
brake pedal.
Press the brake pedal (1).
The more firmly the brake pedal (1) is
pressed, the more the rear wheels are
braked.
8.10 Parking brake
The rear wheels of the machine
are blocked by the engaged
parking brake. This prevents the
ride-on mower from being set in motion
inadvertently (e.g. on slopes, etc.).
Note
Before actuating the drive pedal,
ensure that the correct driving
direction is selected at the driving
direction selector lever.
If the parking brake is engaged or
the brake pedal is pressed, the
drive pedal cannot be actuated.
Warning!
Never operate the machine with a
defective brake.
Always have a defective brake
repaired or adjusted by a specialist
dealer.
STIHL recommends STIHL
specialist dealers.
Never try to service the brakes
yourself.
Note
Always check the function of the
brakes before engaging the parking
brake.