Instruction Manual

SE 122, SE 122 E
English
26
N Empty the container and clean the
machine
After vacuuming liquids:
N Remove the upper part of the
vacuum cleaner so that the filter
element can dry
N Coil power cord around handle and
holder
N Fasten the extension tube, suction
hose and accessories to the holders
provided for this purpose
N The vacuum cleaner must be stored
in a dry room and protected against
unauthorized use
N Switch off the vacuum cleaner
N Unplug the power plug from the
socket
N Release the spring catches (1)
N Lift the upper part of the vacuum
cleaner (2) vertically up and off
When dry-vacuuming without filter bag
and when wet-vacuuming
N Empty the container and dispose of
its contents in accordance with the
applicable regulations
N Continue with: Refit the upper part
of the vacuum cleaner
When dry-vacuuming with filter bag
N Pull filter bag sleeve (1) off intake
port and seal opening in filter bag
sleeve with slide (2)
N Carefully remove filter bag from
container and dispose of in
accordance with statutory
regulations
N Insert new filter bag (3) (instructions
on filter bag)
N Push filter bag sleeve onto intake
port as far as possible
Refit the upper part of the vacuum
cleaner
N Clean the edge of the container
N Refit the upper part of the vacuum
cleaner
N Clean the sleeve and intake port
before fitting the suction hose
After Finishing Work
649BA013 KN
Emptying the container
649BA016 KN
1
2
1
1
649BA010 KN
2
649BA011 KN
3