STIHL SE 133 ME Instruction Manual
English © ANDREAS STIHL AG & Co. KG 2020 0458-660-0121-A. VB0.C20. 0000007782_005_GB Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Translation of Original Instruction Manual Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 2.1 2.2 2.3 Guide to Using this Manual . . . . . . . . . . . . . . . . . . . . . . . . Applicable documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
English 17.1 17.2 17.3 17.4 Wet/dry vacuum cleaner STIHL SE 133 ME . . . . . . . Extension Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sound and Vibration Levels . . . . . . . . . . . . . . . . . . . . . . . REACH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . 25 . 25 . 25 . 25 18 Spare Parts and Accessories . . . . . . . . . . . . . . . . . . . . . . . 25 18.1 Spare Parts and Accessories. . . . . . . . . . . . . . . .
English 3 Overview 2.2 Symbols used with warnings in the text WARNING This symbol indicates dangers that can cause serious injuries or death. ► The measures indicated can avoid serious injuries or death. NOTICE This symbol indicates dangers that can cause damage to property. ► The measures indicated can avoid damage to property. 2.3 Symbols in Text 3 Overview 3.1 Wet/dry vacuum cleaner 2 3 1 4 5 11 10 12 This symbol refers to a chapter in this instruction manual.
English 3 Overview 1 Top part The top part contains the controls, the electric motor and the filters. 14 Connecting cord The connecting cord connects the wet/dry vacuum cleaner to the mains plug. 2 Retainer The retainer attaches various makes of tool box to the top part of the wet/dry vacuum cleaner. 15 Filter housing cap The filter housing cap closes the filter housing. 4 Cooling air filter The cooling air filter filters out dust and dirt from the cooling air drawn in by the electric motor.
English 3 Overview 3 Rotary control The rotary control is used to set the wet/dry vacuum cleaner to the inside diameter of the attached suction hose. 3 Crevice tool The crevice tool is used for picking up in hard-to-reach places. 4 Suction tube The suction tube carries dust, dirt and liquid that are picked up to the hand tube. 4 Rotary switch The rotary switch is used to set the operating modes. 5 Rotary control The rotary control is used to set the suction power. 3.
English 4 Safety Precautions Automatic switching on and off of the wet/dry vacuum cleaner by a connected power tool The wet/dry vacuum cleaner switches on and off together with a connected electric power tool. When the electric power tool is switched off, the wet/dry vacuum cleaner remains switched on for a further 5 seconds to completely empty the suction hose. 3.5 Symbols The symbols may appear on the wet/dry vacuum cleaner. Their meaning is as follows: This symbol denotes automatic filter cleaning.
English 4 Safety Precautions The wet/dry vacuum cleaner STIHL SE 133 ME is not designed to be used for: ► Make sure that the user fulfills the following requirements: – Picking up asbestos – The user is rested. – Picking up dust contaminated by pathogens and mold – The user is physically, sensorially and mentally able to operate the wet/dry vacuum cleaner and to work with it. – Picking up other types of Class H dust with an occupational exposure limit value (ELV) of < 0.
English ￭ Wearing unsuitable footwear can cause the user to slip and fall. The user may be injured. ► Wear sturdy, enclosed footwear with non-slip soles. 4.5 Work area and surroundings WARNING ￭ Bystanders, children and animals are not aware of the dangers of the wet/dry vacuum cleaner and cannot assess them. Bystanders, children and animals may be seriously injured. ► Keep bystanders, children and animals away from the work area. ► Do not leave the wet/dry vacuum cleaner unattended.
English 4 Safety Precautions ► Only fit original STIHL accessories for this wet/dry vacuum cleaner. 4.8 ► Fit the accessories as described in this Instruction Manual or in the Instruction Manual for the accessory. – The connecting cord or the extension cord is damaged. ► Do not insert objects into the openings in the wet/dry vacuum cleaner. 4.7 Operation WARNING ￭ In certain situations the user may no longer be able to concentrate on the job. The user may trip, fall and be seriously injured.
English WARNING ￭ During operation, an incorrect mains voltage or incorrect mains frequency may result in an overvoltage in the wet/dry vacuum cleaner. The wet/dry vacuum cleaner may be damaged. ► Make sure that the mains voltage and the mains frequency of the power supply match the data on the rating plate of the wet/dry vacuum cleaner.
English 5 Preparing the wet/dry vacuum cleaner for use 4.11 Cleaning, Servicing and Repairs WARNING ￭ If the mains plug is plugged into a socket when carrying out cleaning, servicing or repairs, it is possible for the wet/dry vacuum cleaner to be switched on inadvertently. This can result in serious injuries and damage to property. ► Unplug the mains plug of the wet/dry vacuum cleaner from the socket. ￭ Harsh detergents, cleaning with a water jet or pointed objects can damage the wet/dry vacuum cleaner.
English 6 Assembling the wet/dry vacuum cleaner ► Release the container locks (1). ► Lift off the top part (2). ► Remove accessory. ► Insert screws (1) and tighten. Attaching the tool box ► Replace top part (2) in position. ► Fasten the container locks (1). Fitting the holder for the connecting cord or the suction hose T 20 2 12 1 1 0000-GXX-3967-A0 1 0000-GXX-4746-A0 ► Undo screws (1). ► Fit holder (2). ► Insert screws (1) and tighten.
English 6 Assembling the wet/dry vacuum cleaner 1 2 3 0000-GXX-3968-A0 6.3 ► Place filter bag (1) in the container. ► Push sleeve (3) over suction connector (2). ► Open out filter bag (1) inside the container. 6.2.2 Inserting and removing disposal bag 6.3.1 Inserting the disposal bag The disposal bag collects dust and dirt that are picked up and assists with low-dust disposal. The disposal bag is available as an accessory.
English 6 Assembling the wet/dry vacuum cleaner 6.4.2 ► Lift off the top part. 3 Removing the suction hose 4 1 2 3 5 2 ► ► ► ► ► Pull the sleeve (1) off the suction connector (2). Close the sleeve (1) with the slide (5). Tie up disposal bag (3) with the tape (4). Remove disposal bag (3) from the container. Dispose of the disposal bag (3) in accordance with the applicable regulations and in an environmentally responsible manner. 6.4 6.4.
English 7 Switching the wet/dry vacuum cleaner on and off 6.5.2 Removing the hand tube or adapter 6 1 6 0000-GXX-4047-A0 2 ► Squeeze sleeve (1) and pull off hand tube (3) or adapter (2). 6.6.1 6.6.2 Removing accessories ► Pull suction tube, floor tool, crevice tool or other accessory off the hand tube. ► If an electric power tool is connected: Pull adapter off suction connector of electric power tool.
English 8 Checking the wet/dry vacuum cleaner ► Set the rotary switch to the required mode, @ 9. Switching off the wet/dry vacuum cleaner 0000-GXX-3973-A0 3 0000-GXX-4249-A0 7.2 ► If the filter (3) is dirty: Clean the filter. ► If the filter (3) is damaged: Replace the filter. ► Turn the rotary switch to the 0 position. 8 Checking the wet/dry vacuum cleaner 0000-GXX-4112-A0 Checking the filter 2 1. 1 3 3. ► Open the filter housing cap (1).
English 8 Checking the wet/dry vacuum cleaner 8.3 ► Close cover (2). ► Open the filter housing cap (1) until it audibly engages. ► Close the filter housing cap (1). ► Switch on the wet/dry vacuum cleaner. ► Close off the suction hose. The air velocity will decrease and the LED will light up after approx. 1 second. Also, after approx. 7 seconds a series of short beeps will be heard. ► If the LED does not light up or if a succession of short beeps is not heard: Do not use the wet/dry vacuum cleaner.
English 9 Using the wet/dry vacuum cleaner ► Set rotary control to the position of the measured inside diameter. 9 Using the wet/dry vacuum cleaner 9.1 9.3 Setting the suction power The suction power can be set according to the application. Picking up dust and dirt ► If picking up Class M dust: ► Install filter bag or disposal bag. ► Check monitoring of air velocity in the suction hose. MAX. Turn the rotary switch to the I position. MIN. 0000-GXX-3974-A0 Automatic filter cleaning is switched on.
English 10 After Finishing Work 9.5 Operation with the wet/dry vacuum cleaner being switched on and off automatically by a connected power tool ► Switch on the electric power tool. The wet/dry vacuum cleaner will be switched on automatically. ► Operate the electric power tool. When the electric power tool is switched off, the wet/dry vacuum cleaner continues to operate for a further 5 seconds to empty the suction hose. ► Switch off the wet/dry vacuum cleaner. ► Switch off the electric power tool.
English 11 Transporting ► Clean the float. ► Allow filter to dry. 3 4 ► Remove suction hose. ► Roll up the suction hose (4) and hang it on the holder (2) or secure with rubber strap (3). 1 0000-GXX-4045-A0 2 0000-GXX-4109-A0 4 ► Clean the seal (1) with a damp cloth. ► Replace the top part in position. 11 Transporting 0000-GXX-4110-A0 11.1 Transporting the wet/dry vacuum cleaner ► Store accessory on the wet/dry vacuum cleaner. 10.
English 13 Cleaning ► Open cover (2). ► Remove filter (3). 3 13 Cleaning 13.1 Cleaning the wet/dry vacuum cleaner and accessories ► Rinse out filter (3) under running water. ► Switch off the wet/dry vacuum cleaner and pull the mains plug out of the socket. ► Clean the wet/dry vacuum cleaner and accessories with a damp cloth. ► Allow filter (3) to dry. 6 4 5 0000-GXX-4112-A0 14 Maintenance 14.1 Cleaning the filter 2 ► Clean the seals (4 and 5) with a damp cloth.
English 15 Repairing ► Install filter (3). ► Close cover (2). ► Open the filter housing cap (1) until it audibly engages. 15 Repairing ► Close the filter housing cap (1). 15.1 Repairing the wet/dry vacuum cleaner The user cannot personally repair the wet/dry vacuum cleaner and accessory. 14.2 Cleaning the cooling air filter 1 3 2 0000-GXX-4117-A0 4 2 3 1 ► If the wet/dry vacuum cleaner or accessory is damaged: Do not use the wet/dry vacuum cleaner or accessory.
English 16 Troubleshooting 16 Troubleshooting 16.1 Correcting faults on the wet/dry vacuum cleaner Fault The wet/dry vacuum cleaner does not start when switched on. Cause The plug of the connecting cord or extension cord is not plugged in. Remedy ► Plug in mains plug of connecting cord or extension cord. The circuit breaker (fuse) or the overload cutout ► Look for cause of tripping and remedy it. has tripped.
English Fault The suction power is too low. The air flow rate is less than 20 m/s. The air velocity monitoring LED in the suction hose lights up and a succession of short beeps is heard. 24 16 Troubleshooting Cause The suction power is set too low. Remedy ► Set the suction power. The filter bag or the container is full. The filter is dirty. ► ► ► ► The filter bag or the container is full. The filter is dirty. The suction hose, the hand tube or the accessory is blocked up.
English 17 Specifications 17 Specifications 17.1 Wet/dry vacuum cleaner STIHL SE 133 ME – Rated voltage: see rating plate – Frequency: see rating plate 220 V to 240 V – Cord length up to 20 m: AWG 15 / 1.5 mm² – Cord length 20 m up to 50 m: AWG 13 / 2.5 mm² 100 V to 127 V – Cord length up to 10 m: AWG 14 / 2.0 mm² – Fuse: – Cord length 10 m up to 30 m: AWG 12 / 3.5 mm² – 16 A – Switzerland, Australia, New Zealand only: 10 A – Power consumption to EN 60335-2-69: 1200 W 17.
English Original STIHL replacement parts and original STIHL accessories are available from STIHL servicing dealers. 19 Disposal The year of construction, the country of manufacture and the machine number are shown on the wet/dry vacuum cleaner. Waiblingen, 12 February 2016 19 Disposal ANDREAS STIHL AG & Co. KG pp 19.1 Disposing of the wet/dry vacuum cleaner Information concerning disposal is available from any STIHL servicing dealer.
20 EC Declaration of Conformity 0458-660-0121-A English 27
English 28 20 EC Declaration of Conformity 0458-660-0121-A
0458-660-0121-A englisch G www.stihl.
