Instruction Manual

ManualsBrandsSTIHL ManualsHigh-Pressure Cleaners & Vacuum CleanersCertified Wet and Dry Vacuum Cleaners

Table Of Contents

1 Introduction
2 Guide to Using this Manual
- 2.1 Applicable documents
- 2.2 Symbols used with warnings in the text
- 2.3 Symbols in Text
3 Overview
- 3.1 Wet/dry vacuum cleaner
- 3.2 Controls and LED
- 3.3 Accessories provided
- 3.4 Equipment features
- 3.5 Symbols
4 Safety Precautions
- 4.1 Warning symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and Equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Connecting to the power supply
- 4.9 Transport
- 4.10 Storage
- 4.11 Cleaning, Servicing and Repairs
5 Preparing the wet/dry vacuum cleaner for use
- 5.1 Preparing the wet/dry vacuum cleaner for use
6 Assembling the wet/dry vacuum cleaner
- 6.1 Assembling the wet/dry vacuum cleaner
- 6.2 Inserting and removing filter bag
  - 6.2.1 Inserting the filter bag
  - 6.2.2 Removing the filter bag
- 6.3 Inserting and removing disposal bag
  - 6.3.1 Inserting the disposal bag
  - 6.3.2 Removing the disposal bag
- 6.4 Fitting and removing suction hose
  - 6.4.1 Attaching the suction hose
  - 6.4.2 Removing the suction hose
- 6.5 Fitting and removing hand tube and adapter
  - 6.5.1 Fitting the hand tube or adapter
  - 6.5.2 Removing the hand tube or adapter
- 6.6 Fitting and removing accessories
  - 6.6.1 Installing accessories
  - 6.6.2 Removing accessories
7 Switching the wet/dry vacuum cleaner on and off
- 7.1 Switching on the wet/dry vacuum cleaner
- 7.2 Switching off the wet/dry vacuum cleaner
8 Checking the wet/dry vacuum cleaner
- 8.1 Checking the filter
- 8.2 Checking the cooling air filter.
- 8.3 Checking monitoring of air velocity in the suction hose
- 8.4 Checking the float
9 Using the wet/dry vacuum cleaner
- 9.1 Setting the suction power
- 9.2 Setting the diameter of the suction hose
- 9.3 Picking up dust and dirt
- 9.4 Picking up liquid
- 9.5 Operation with the wet/dry vacuum cleaner being switched on and off automatically by a connected power tool
10 After Finishing Work
- 10.1 After finishing work
- 10.2 Emptying the container
11 Transporting
- 11.1 Transporting the wet/dry vacuum cleaner
12 Storing
- 12.1 Storing the wet/dry vacuum cleaner
13 Cleaning
- 13.1 Cleaning the wet/dry vacuum cleaner and accessories
14 Maintenance
- 14.1 Cleaning the filter
- 14.2 Cleaning the cooling air filter
15 Repairing
- 15.1 Repairing the wet/dry vacuum cleaner
16 Troubleshooting
- 16.1 Correcting faults on the wet/dry vacuum cleaner
17 Specifications
- 17.1 Wet/dry vacuum cleaner STIHL SE 133 ME
- 17.2 Extension Cords
- 17.3 Sound and Vibration Levels
- 17.4 REACH
18 Spare Parts and Accessories
- 18.1 Spare Parts and Accessories
19 Disposal
- 19.1 Disposing of the wet/dry vacuum cleaner
20 EC Declaration of Conformity
- 20.1 Wet/dry vacuum cleaner STIHL SE 133 ME

0458-660-0121-A

English

6 Assembling the wet/dry vacuum cleaner

► Release the container locks (1).

► Lift off the top part (2).

► Remove accessory.

► Replace top part (2) in position.

► Fasten the container locks (1).

Fitting the holder for the connecting cord or the suction hose

► Undo screws (1).

► Fit holder (2).

► Insert screws (1) and tighten.

Attaching the retainer for a tool box

► Unscrew screws (1).

► Unscrew the screws (2) and dispose of them.

► Place retainers (3 and 4) on top part.

► Insert screws (5) supplied and tighten.

► Insert screws (1) and tighten.

Attaching the tool box

► Put the tool box on top and lock it in place.

6.2 Inserting and removing filter bag

6.2.1 Inserting the filter bag

► Switch off the wet/dry vacuum cleaner and pull the mains

plug out of the socket.

► Release the container locks.

► Lift off the top part.

0000-GXX-3967-A0

T 20

0000-GXX-3966-A0

T 20

0000-GXX-4746-A0