Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the wet/dry vacuum cleaner for use
- 6 Assembling the wet/dry vacuum cleaner
- 7 Switching the wet/dry vacuum cleaner on and off
- 8 Checking the wet/dry vacuum cleaner
- 9 Using the wet/dry vacuum cleaner
- 10 After Finishing Work
- 11 Transporting
- 12 Storing
- 13 Cleaning
- 14 Maintenance
- 15 Repairing
- 16 Troubleshooting
- 17 Specifications
- 18 Spare Parts and Accessories
- 19 Disposal
- 20 EC Declaration of Conformity
0458-660-0121-A
14
English
6 Assembling the wet/dry vacuum cleaner
► Lift off the top part.
► Pull the sleeve (1) off the suction connector (2).
► Close the sleeve (1) with the slide (5).
► Tie up disposal bag (3) with the tape (4).
► Remove disposal bag (3) from the container.
► Dispose of the disposal bag (3) in accordance with the
applicable regulations and in an environmentally
responsible manner.
6.4 Fitting and removing suction hose
6.4.1 Attaching the suction hose
► Pull off the container cap (1).
► Push sleeve (2) into the suction connector (3) and turn
until it is firmly seated.
6.4.2 Removing the suction hose
► Pull the sleeve (1) out of the suction connector (2).
► Push container cap (3) into suction connector (2).
6.5 Fitting and removing hand tube and adapter
6.5.1 Fitting the hand tube or adapter
► Push hand tube (1) or adapter (3) into the sleeve (2).
The hand tube (1) or adapter (3) engages audibly.
0000-GXX-4048-A0
1
3
2
25
4
0000-GXX-3970-A0
1
3
2
0000-GXX-4070-A0
3
2
1
2
1
0000-GXX-3971-A0
3