Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the wet/dry vacuum cleaner for use
- 6 Assembling the wet/dry vacuum cleaner
- 7 Switching the wet/dry vacuum cleaner on and off
- 8 Checking the wet/dry vacuum cleaner
- 9 Using the wet/dry vacuum cleaner
- 10 After Finishing Work
- 11 Transporting
- 12 Storing
- 13 Cleaning
- 14 Maintenance
- 15 Repairing
- 16 Troubleshooting
- 17 Specifications
- 18 Spare Parts and Accessories
- 19 Disposal
- 20 EC Declaration of Conformity
0458-660-0121-A
16
English
8 Checking the wet/dry vacuum cleaner
► Set the rotary switch to the required mode, @ 9.
7.2 Switching off the wet/dry vacuum cleaner
► Turn the rotary switch to the 0 position.
8.1 Checking the filter
► Open the filter housing cap (1).
► Press down on the filter housing cap (1) and swing the
filter housing cap (1) out.
► Open cover (2).
► Remove filter (3).
► If the filter (3) is dirty: Clean the filter.
► If the filter (3) is damaged: Replace the filter.
► Clean the seals (4 and 5) with a damp cloth.
► Clean the seat (6) with a damp cloth.
► Install filter (3).
8 Checking the wet/dry vacuum cleaner
0000-GXX-3973-A0
2
1
1.
2.
3.
3
0000-GXX-4111-A0
3
0000-GXX-4249-A0
0000-GXX-4112-A0
4
5
6
2
1
3
2.
1.
0000-GXX-4114-A0