Instruction Manual

0458-660-0121-A
5
English 3 Overview
3 Rotary control
The rotary control is used to set the wet/dry vacuum
cleaner to the inside diameter of the attached suction
hose.
4 Rotary switch
The rotary switch is used to set the operating modes.
5 Rotary control
The rotary control is used to set the suction power.
3.3 Accessories provided
1 Floor tool
The floor tool is used for picking up on flat surfaces.
2 Adapter
The adapter connects the suction hose to an electric
power tool.
3 Crevice tool
The crevice tool is used for picking up in hard-to-reach
places.
4 Suction tube
The suction tube carries dust, dirt and liquid that are
picked up to the hand tube.
5 Hand tube
The hand tube connects the suction hose to an
accessory.
6 Suction hose
The suction hose carries dust, dirt and liquid that are
picked up to the container.
7Filter bag
The filter bag collects dust and dirt that are picked up and
assists with low-dust disposal. The filter bag keeps dust
and dirt away from the filter.
3.4 Equipment features
Automatic filter cleaning
Monitoring the air velocity in the suction hose
Anti-static charge system
Static charge is created by friction between the dust picked
up and the inside of the suction hose. The wet/dry vacuum
cleaner automatically conducts away static charge.
0000-GXX-3964-A0
1
2
3
4
5
6
7
To keep the suction power constant, the wet/dry
vacuum cleaner automatically cleans the filter
during operation. Loud knocking noises will be
heard.
The wet/dry vacuum cleaner monitors the air
velocity in the suction hose. If the air velocity
falls below 20 m/s the LED will light up. Also,
after 7 seconds a series of short beeps will be
heard.