Operation Manual

14
English / USA
BG 55, BG 65, BG 85, SH 55, SH 85
Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-up
in the tank to release slowly.
After fueling, tighten fuel cap
as securely as possible by hand.
Change the fuel pick up body
every year.
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
BG 55, 65, SH 55
Observe safety precautions - see
chapter “Safety Precautions”.
Start as follows:
: Set switch (1) to position
I
: Squeeze the throttle trigger (2) and
press in the interlock button (3) at
the same time.
: Release the throttle trigger.
: Release the interlock button, this is
the starting throttle position.
The interlock button enables the
throttle trigger to be locked in the full
throttle position.
Fueling
295BA035 KN
295BA034 KN
Starting / Stopping
the Engine
3
2
1
295BA013 KN