Instruction Manual

SR 200
English
32
Strainer in solution container (only with
mounted pressure pump or if ULV meter-
ing knob is used)
Clean or replace
XX
Metering unit on blower tube Check XX
Antivibration elements
Check XXX
Have replaced by dealer
1)
X
Blower air intake screen
Check XX
Clean X
Throttle cable Adjust X
Safety labels Replace X
1)
STIHL recommends a STIHL servicing dealer.
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required