Operation Manual

SR 200
English
17
a 1/3 throttle
b 2/3 throttle
To disengage the travel limiter,
N return the setting lever (1) to the run
position F.
Before Starting
N Close valve lever (1) for solution
feed.
Start the engine.
N Observe safety precautions.
NOTICE
Start your unit on a clean, dust-free
surface only to ensure that no dust is
sucked in.
N The setting lever must be on F
N Press the manual fuel pump bulb at
least five times – even if the bulb is
filled with fuel.
Cold Engine (cold start)
N Turn the choke knob to g.
Warm Engine (warm start)
N Turn the choke knob to <.
Also use this setting if the engine has
been running but is still cold.
0002BA053 KN
a
b
Starting / Stopping the
Engine
0002BA060 KN
1
0002BA019 KN
9928BA006 AM
9928BA007 AM9928BA008 AM