Instruction Manual

TS 410, TS 420
English
32
Before fueling, clean the fuel filler cap
and the area around it so that dirt cannot
fall into the tank.
Thoroughly shake up the mixture in the
canister before fueling your machine.
WARNING
To avoid the risk of fire or other injuries
due to escaping gasoline vapors, open
the fuel filler cap carefully so that any
excess pressure in the tank can escape
slowly.
WARNING
Never use a tool to open the bayonet
cap. This could damage the cap and
cause fuel to leak out.
Do not spill any fuel and do not fill the
tank up to the brim.
Open the fuel filler cap
Press the cap down with your hand as
far as possible, turn it counterclockwise
(approx. 1/8 turn) and remove it.
Close the fuel filler cap
N Fit the cap and turn it until it
engages in the bayonet mount.
N Press the cap down with your hand
and turn it clockwise
(approx. 1/8 turn) until it engages
completely. Check cap for
tightness.
Change the fuel pickup body every year
N Drain the fuel tank.
N Pull the fuel pickup body out of the
tank with a hook and disconnect it
from the hose.
N Connect a new fuel pickup body to
the hose.
N Return the fuel pickup body to the
tank.
Fueling
1.
2.
370BA017 KN
1.
2.
370BA018 KN
370BA019 KN