Instruction Manual

TS 410, TS 420
English
47
Abrasive wheels (TS 420)
Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using genuine STIHL
replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
Composite resin abrasive wheels
Minimum outside diameter of
thrust washers:
4.06 in.
(103 mm)
Max. depth of cut: 3.9 in.
(100 mm)
Diamond abrasive wheels
Minimum outside diameter of
thrust washers:
4.06 in.
(103 mm)
Max. depth of cut: 3.9 in.
(100 mm)
Outside diameter: 14 in.
(350 mm)
Max. thickness: 0.189 in.
(4.8 mm)
Bore diameter/spindle
diameter:
0.787 in.
(20 mm)
Tightening torque: 22 lbf ft
(30 Nm)
Composite resin abrasive wheels
Minimum outside diameter of
thrust washers:
4.06 in.
(103 mm)
Max. depth of cut: 4.9 in.
(125 mm)
Diamond abrasive wheels
Minimum outside diameter of
thrust washers:
4.06 in.
(103 mm)
Max. depth of cut: 4.9 in.
(125 mm)
Maintenance and Repairs Disposal
000BA073 KN