Instruction Manual
Table Of Contents
Read, understand and keep the
User Manual.
Wear safety glasses.
Applicable Documents
The local safety regulations apply.
► In addition to this User Manual, read,
understand and keep the following
documents:
–
Instruction manual of STIHL pres‐
sure washer being used
Videos
stihl.com/sxbyL2
User Information
Main Parts
A
1)
Tube
2)
Suction tube
3)
Hose
Safety information
The sand and wet-blasting kit is used for
wet blasting of masonry and metal parts.
STIHL recommends using STIHL gran‐
ules or other blasting granules with a
grain size of 0.8 mm for sand and wet-
blasting kits.
Only suitable for use with STIHL RE ser‐
ies pressure washers.
The pressure specification (p
max
) and
temperature specification (t
max
) of the
pressure washer must not be higher
than the pressure specification and tem‐
perature specification on the accesso‐
ries.
Assembling
► Fixing the sand and wet-blasting kit
B.
Working
► Immerse the suction tube into the
granules
B.
► Move the sand-wet jet evenly along
the surface to be cleaned.
After finishing work
► Remove suction tube and press lever
of spray gun C.
► Lift the suction tube and press the
lever of the spray gun until the gran‐
ules are flushed out of the sand and
wet-blasting kit
C.
Cleaning
► Clean the sand and wet-blasting kit
with a damp cloth.
Informations concernant la
présente Notice d'emploi
Symboles d'avertissement
Les symboles d'avertissement figurant
sur le dispositif de sablage humide signi‐
fient ce qui suit :
Respectez les consignes de
sécurité et leurs mesures.
Lisez, comprenez et conservez
les instructions d'utilisation.
Portez des lunettes de sécurité.
Documents en vigueur
Les règles de sécurité locales s'appli‐
quent.
4
0457-367-0040-B. VA0.D21.