HW2 Wireless TV Headphones User Manual
CONTENTS In the Box ------------------------------------------------------------- 1 Product Overview --------------------------------------------------- 2 LED Indicators Guide ---------------------------------------------- 3 Turn on/off the Headphones ------------------------------------- 3 Charge the Headphones ------------------------------------------ 3 Connect the Transmitter to TV ----------------------------------- 5 FAQs ------------------------------------------------------------------- 7 Warranty -
In the Box Headphones RCA Audio Cable Charge the Headphones 1. Connect the power adapter to the transmitter and plug the mains charger into a power source.
Product Overview Headphones Signal Indicator Power Indicator Power Switch Tuning Button Volume Controller Charging Contacts Charging Dock/Transmitter Charging Pins Charging Indicator Signal Indicator Channel Switch Button RCA Inputs Charging Port -2-
LED Indicators Guide Power on The power indicator on the right ear cup stays red. Power off The power indicator on the right ear cup goes off. Charging The charging indicator on the charging dock flashes green. Fully Charged The charging indicator on the charging dock stays green. Connected The signal indicator on the charging dock stays red, and the signal indicator on the left ear cup stays green.
2. Place the headphones on the charging dock and make sure the charging contacts on the ear cup match well with the charging pins on the charging dock. 3. Check whether the charging indicator on the charging dock flashes green. Notes: ● Before charging the headphones for the first time, please remove the insulating sheet from the headphones. ● Fully charge the headphones before the first-time use.
Connect the Transmitter to TV Connect the Transmitter to a TV with RCA Audio Cable ① ② Connect the power adapter to the transmitter and plug the mains charger into a power source. Plug the RCA connectors into the RCA inputs on the charging dock and plug the 3.5 audio connector into the audio-out port on your TV. ON OF F ③ ④ Pick up the headphones, and then the signal indicator on the transmitter stays red. Turn on the headphones.
Connect the Transmitter to a TV with RCA Adapter Cable ① ② Plug the provided RCA adapter cable into the RCA outputs on your TV and the 3.5 audio connector of the RCA audio cable into the audio jack of the adapter cable. Connect the power adapter to the transmitter and plug the mains charger into a power source. ON OF F ③ ④ Pick up the headphones, and then the signal indicator on the transmitter stays red. Turn on the headphones.
FAQs Q: No sound comes from headphones, what should I do? A: Check whether the signal light on the transmitter stays red, if not, please try the following: • Make sure the charging dock is connected to a power source. • Make sure the headphones have been turned on. • Do not plug into any ports labeled as “AV IN”. • If your TV has a 3.5mm audio output, please make sure the 3.5mm audio cable is plugged into the audio-out port behind the TV. Do not plug it into any audio-in port behind the TV.
Warranty We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of a defect, so we are happy to offer a ONE-year hassle-free warranty to all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices. Care and Maintenance Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Important Safety Instructions ● Use of headphones will impair your ability to hear other sounds. Use caution while using your headphones when you are engaging in any activity that requires your full attention. ● If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product. ● This package contains small parts that may be hazardous to children and should be kept out of reach from children.
