Use and Care Manual

www.nationalnail.com
WARNINGS
4
OPERATION OF THE TOOL
• Never inspect, maintain, repair, adjust, clear a jam or store the tool with the air connected.
• Never use the tool in proximity of flammable gases or liquids, as some tools will create sparks
that can be an ignition source for a fire or explosion.
• Always inspect the safety device for damage and proper operation, prior to operation.
• Never assume the tool is empty of fasteners.
• Never point the tool toward yourself or any other persons.
• Never cycle the tool unless it is in contact with the work-piece.
• Never use the tool as a hammer or wedging device or drop to the floor from any height.
• Always remove your finger from the trigger when pausing from cycling.
• Never tamper with the safety device or use the tool if the safety device is not functioning
properly.
• Use only 5/8” STINGER StaplePac cap fasteners with the STINGER™ CS58 Cap Stapler.
Never use any fasteners that are not specified for use in this tool. The CS58 holds 1 coil of
plastic caps (200 caps) and 2 strips of staples (100 staples each).