Installation Guide

SEADASH3B

SEADASH3W

Installation Guide

UNIVERSAL MARINE 3” RADIO KIT

 Drill

 5/32”, 11/64” Drill Bits

 Phillips Screwdriver

 7mm Wrench / Socket

 Cutting Tool / Hole Saw

 Masking Tape

Recommended Tools

Parts List

OPTIONAL SMRAUXUSB3

For most applications, the USB

and/or the AUX input will need to

be accessible from the front. We

recommend the Stinger Marine

SMRAUXUSB3, sold seperately.

#8 X 1 INCH STAINLESS STEEL

TRUSS HEAD SCREWS (4)

#8-32 X 1.5 INCH STAINLESS STEEL

HEX DRIVE SET SCREWS (4)

#8-32 STAINLESS STEEL

HEX MACHINE NUTS (4)

#8 STAINLESS STEEL

LOCKWASHERS (4)

RADIO MOUNTING

PANEL (1)

MOUNTING TEMPLATE (1)

Stinger is a Power Brand of AAMP Global

15500 Lightwave, Clearwater, Florida 33760

P: 888-228-5560

support@stingerelectronics.com

www.stingerelectronics.com

TECHNICAL SUPPORT:

727-592-5991

Mon-Fri 9AM-8PM EST

Sat 9AM-7PM EST

support@aampglobal.com

REV. 011420

PAGE 1
SEADASH3B SEADASH3W UNIVERSAL MARINE 3” RADIO KIT Installation Guide Recommended Tools  Drill  5/32”, 11/64” Drill Bits  Phillips Screwdriver  7mm Wrench / Socket  Cutting Tool / Hole Saw  Masking Tape Parts List #8 X 1 INCH STAINLESS STEEL TRUSS HEAD SCREWS (4) RADIO MOUNTING PANEL (1) #8 STAINLESS STEEL LOCKWASHERS (4) #8-32 X 1.
PAGE 2
Rear Mounting When there is access behind the mounting location, it’s recommended to mount the SEADASH3 panel using the four threaded studs. NOTE: If you are replacing a Single DIN radio with a cover, you may be able to use the existing holes to mount the SEADASH3 panel. 1. Using the supplied template, determine the mounting location. 2. Using a 5/32” drill bit, mark and drill the four mounting holes. 3. Using a 2mm allen wrench, thread the four studs in the corresponding locations on the back of the panel.