User Manual

ManualsBrandsStinger ManualsCar AmplifiersMicro 2-Channel 350W Marine/Powersports Amplifier - Silver

Amplier Manual

Manual de Amplicador

Features

• RCA or High Level Signal Input

• Weather Resistant for Marine and Power Sports

• Ultra Compact Chassis

• High and Low Pass Crossovers

• Direct Insert Power Terminals

• Remote Volume Control with Mute Included

• Efcient Class D Topology

SPX350X2 / SPX700X4 / SPX1000X5

Características

• Resistencia climática para la marina y deportes de poder

• Ultra compacto y Topología eciente tipo D

• Terminales de poder de inserción directa

• Control remoto de volumen y silenciado incluido

• Certicado de Nacimiento de puerto de alimentación

Summary of content (12 pages)

PAGE 1
SPX350X2 / SPX700X4 / SPX1000X5 Amplifier Manual Manual de Amplificador Features • RCA or High Level Signal Input • Weather Resistant for Marine and Power Sports • Ultra Compact Chassis • High and Low Pass Crossovers • Direct Insert Power Terminals • Remote Volume Control with Mute Included • Efficient Class D Topology Características • Resistencia climática para la marina y deportes de poder • Ultra compacto y Topología eficiente tipo D • Terminales de poder de inserción directa • Control remoto de vo
PAGE 2
Amplifier Owner’s Manual SPX350X2 Specifications 2 Channel Power Amplifier Frequency Response: ± 1dB from 20Hz to 20kHz Signal to Noise Ratio: >110dB High and Low Pass Crossovers: 12dB per Octave Low Pass Crossover Range: 40Hz to 400Hz High Pass Crossover Range: 40Hz to 400Hz Input Range: 200 millivolts to 12 volts Typical Efficiency: 80% Damping Factor: Greater than 200 SPX350x2 Recommended Fuse Size: 30 amp Power/Ground Wire Size: 8 Gauge Dimensions: 141mm L x 120mm W x 41mm H 5.56” L x 4.73” W x 1.
PAGE 3
Amplifier Owner’s Manual SPX700X4 Specifications 4 Channel Power Amplifier Frequency Response: ± 1dB from 20Hz to 20kHz Signal to Noise Ratio: >110dB High and Low Pass Crossovers: 12dB per Octave Low Pass Crossover Range: 40Hz to 400Hz High Pass Crossover Range: 40Hz to 400Hz Input Range: 200 millivolts to 12 volts Typical Efficiency: 80% Damping Factor: Greater than 200 PX700x4 Recommended Fuse Size: 60 amp Power/Ground Wire Size: 8 Gauge Dimensions: 206mm L x 120mm W x 41mm H 8.1” L x 4.73” W x 1.
PAGE 4
Amplifier Owner’s Manual SPX1000X5 Specifications 5 Channel Power Amplifier Frequency Response: ± 1dB from 20Hz to 20kHz Signal to Noise Ratio: >110dB High and Low Pass Crossovers: 12dB per Octave Low Pass Crossover Range: 40Hz to 400Hz High Pass Crossover Range: 40Hz to 400Hz Sub Crossover Range: 50Hz to 250Hz Input Range: 200 millivolts to 12 volts Typical Efficiency: 80% Damping Factor: Greater than 200 Recommended Fuse Size: 80 amp Power/Ground Wire Size: 8 Gauge Dimensions: 215mm L x 130mm W x 41mm
PAGE 5
Amplifier Owner’s Manual SPX350X2 Connections / Settings 2 Channel Power Amplifier SPX350x2 GROUND Connect to the negative terminal of the battery or bolted to a clean, unpainted part of the chassis of the vehicle. REMOTE Connected to switched +12V, usually a remote trigger wire coming from the head unit or an ignition lead if one is not available. +12V Connect to positive terminal (+12V) of the battery. A in-line fuse should be installed within 18 inches of the battery.
PAGE 6
Amplifier Owner’s Manual SPX700X4 4 Channel Power Amplifier Connections / Settings SPX700x4 GROUND Connect to the negative terminal of the battery or bolted to a clean, unpainted part of the chassis of the vehicle. REMOTE Connected to switched +12V, usually a remote trigger wire coming from the head unit or an ignition lead if one is not available. +12V Connect to positive terminal (+12V) of the battery. A in-line fuse should be installed within 18 inches of the battery.
PAGE 7
Amplifier Owner’s Manual Connections / Settings SPX1000X5 5 Channel Power Amplifier GROUND Connect to the negative terminal of the battery or bolted to a clean, unpainted part of the chassis of the vehicle. FREQ Used to adjust the crossover frequency when crossover is set to HPF or LPF. Continuously variable from 40Hz to 400Hz REMOTE Connected to switched +12V, usually a remote trigger wire coming from the head unit or an ignition lead if one is not available.
PAGE 8
Amplifier Owner’s Manual System tuning 1. Install all system fuses. 12. Repeat input level adjustments for all other amplifiers. 2. Set the amplifier’s input sensitivity controls to their minimum positions (full counterclockwise). 13. Reduce the source unit volume to a comfortable level. 3. Set all amplifier signal routing switches according to your system’s design. 4. Make preliminary adjustments to the crossover frequency, usually 80Hz is good starting point for high and low pass.
PAGE 9
Amplifier Owner’s Manual Troubleshooting No power: Check voltage at amplifier with a DMM (volt meter), B+ and REM (with head unit on) the voltage should register between 12.2V and 14.6V when using the attached ground lead of the amplifier. Check fuse at amplifier and at the battery. Use a meter to verify connection from one end of the fuse to the other, breaks may not always be visible. If the fuse is blown, check the power wire and also the amplifier for a short.
PAGE 10
Amplifier Owner’s Manual System Diagrams SPX350X2 TWO 4 OHM SPEAKERS (4 OHM STEREO) SPX350X2 FOUR 4 OHM SPEAKERS (2 OHM STEREO) SPX350X2 SINGLE 4 OHM SUBWOOFER (4 OHM BRIDGED) SPX700X4 TWO 4 OHM SPEAKERS & ONE 4 OHM SUBWOOFER (4 OHM STEREO (FRONT) & 4 OHM BRIDGED (REAR) © 2019 Stinger • www.stingerelectronics.
PAGE 11
Amplifier Owner’s Manual System Diagrams SPX1000X5 FOUR 4 OHM SPEAKERS & TWO 4 OHM SUBWOOFERS (4 OHM STEREO (FRONT/REAR) & 2 OHM (SUB) © 2019 Stinger • www.stingerelectronics.
PAGE 12
Stinger is a Power Brand of AAMP Global 15500 Clearwater, Florida 33760 P: 888-228-5560 support@stingerelectronics.com www.stingerelectronics.