Installation Guide

Stinger HEIGH10 Radio Replacement Kit

for select 2014-2019 Silverado/Sierra Truck

SR-GM14H

Pacific Accessory Corporation

Page 10

Rev: V1

Date: 030121

Step 2 Step 3

Step 1

Unplug the Black antenna cable

from the factory tuner and re-route

it down and through the right side

opening of the lower CD/DVD area.

Connect the BAA22 Antenna

adapter to the factory antenna.

Unplug the Green and Gray

or Mustard and Gray (IOB)

connectors from the factory tuner

and re-route them down and

through the left opening of the

lower CD/DVD area.

Part Five: Vehicle Side Plug Relocation and Antenna Adapter

Section 2: In-Vehicle Harness Connections and Preparation (cont.)

Section 3: Interface and Main Harness Connections and Preparation

Part One: RP5-GM51 Radio Interface Connections

Step 3Step 2

Step 1

Connect the four connectors from

the SR-GM14H-HAR-A Main

Harness to the indicated ports on

the RP5-GM51 module.

Remove the warning sticker on

Vehicle Connections port on the

other side of the RP5-GM51

module.

Using a small at-blade

screwdriver or similar, set the

Radio Select Dial on the side of

the RP5-GM51 to Number 4.

1 2