Installation Guide

ManualsBrandsStinger ManualsAudioSilverado/Sierra Installation Kit For HEIGH10 Multimedia Head Unit

1

2

3

4

5

6

7

8

9

Stinger HEIGH10 Radio Replacement Kit

for select 2014-2019 Silverado/Sierra Truck

SR-GM14H

© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

Pacific Accessory Corporation

Page 4

Rev: V1

Date: 030121

®

®

Step 4

Part One: Center Dash Disassembly (cont.)

Remove the three 7mm screws

securing the air vent on the left

side of the radio opening and

remove the vent.

Step 3

Step 2

Step 1

Using a panel tool or similar,

release the top retaining clips and

remove the storage assembly.

Remove the upper Torx T15

screw inside the storage

compartment.

Remove the two Torx T15 screws

from the bottom edge of the

storage compartment.

Part Two: Lower Storage Compartment Removal

Section 1: Disassembly (cont.)