Installation Guide

Stinger HEIGH10 Radio Replacement Kit

for select 2014-2019 Silverado/Sierra Truck

SR-GM14H

Pacific Accessory Corporation

Page 9

Rev: V1

Date: 030121

Step 1

Step 2

Step 3

Step 4

Route the steering wheel control

lead into the CD/DVD area

through the left side opening in the

rear of the cavity.

Part Three: Steering Wheel Control (SWC) Retention Harness (cont.)

Part Four: GPS Antenna

The GPS antenna is required for proper operation of Apple CarPlay and Android Auto, in addition to the optional GPS if

installed. The GPS antenna is included in the HEIGH10 hardware.

Section 2: In-Vehicle Harness Connections and Preparation (cont.)

Continue routing the GPS cable

across the inner dash towards the

radio opening securing with zip ties.

Position the GPS antenna and

route the antenna cable down

into the glove box area. Replace

the A pillar panel and ensure the

cable does not interfere or get

pinched.

Route the GPS cable into the CD/

DVD area through the right side

opening at the rear of the cavity.