Installation Guide

Stinger HEIGH10

Radio Replacement Kit

for 2011-2018 Jeep Wrangler JK

SR-JK11H

AAMP Global is not a󰀩liated with FCA US LLC. Jeep® is a registered trademark of FCA US LLC. The terms

OEM, Jeep®, Wrangler®, and Gladiator® all terms are used strictly for identication purposes only. It is not

implied that any part listed is a product of, or approved by, Fiat Chrysler Automobiles.

Pacific Accessory Corporation

Page 10

Rev: V2

Date:052521

Part Three: Attaching the Display Panel

Section 4: Radio Unit Installation (cont.)

Step 3

Step 4

Step 2Step 1

Apply a piece of removable tape

across the bottom of the radio

opening to protect the dash panel

during installation.

Apply a piece of cloth tape across

the top and bottom edges of the

radio opening. Approximately 1/16”

of tape along the face of the dash

panel and the remainder folded

inward.

Connect the two display cables to

the back of the display.

Once the radio display is connected, and

before attaching the display panel, it is

recommended to power up the radio and

check functionality...

Volume, Balance, Fade

AM/FM Reception

Bluetooth

USB

Apple Carplay

Android Auto

Steering Wheel Controls

Camera(s)

1/16”