Owner's Manual

6
7
StingerElectronics.com StingerElectronics.com
GETTING STARTED
SELECTING A SOURCE
Back Arrow Exit
POWER UP!
With vehicle ignition in the ON or ACC
position, Press and Hold the knob for 2
seconds to power ON/OFF.
The source will automatically default to
the last source used prior to powering
down.
You can adjust the audio volume at
start-up in Sound Settings on page 34.
The Information Bar is located at the
top of the screen. Depending on the
SOURCE, it will provide information
or content sensitive controls. Also,
displays time, phone info and may
contain BACK ARROW and EXIT
buttons.
Customizable TABS can be accessed by
swiping the up arrow  at the bottom
of the screen. Tabs give direct access to
sources/settings and can be customized
in Settings > Tabs on page 28.
The active Tab will be highlighted and
sources that are not available will be
dimmed out. Once the Tabs are opened,
the will auto-close after 5 seconds or press
the down arrow
 to close the tabs.
There are multiple ways to scroll...
Swiping Up/Down, Up/Down Arrows
SETTING THE TIME
1) Touch and Hold the Time Display
on the Information Bar for 2 seconds
to access the clock settings.
2) Swipe or click arrows to set time
and format.
3) Touch the BACK ARROW or EXIT
to save and exit.
2
3
1
To select a source, press the HOME
button.
The HOME MENU displays all Sources,
along with Settings, Audio, Display
and Camera options.
SOURCES that are not currently
available are grayed out.


QUICK TIP
Information Bar
Source/Info
Time
Power
ON/OFF
Swipe Up
To Open TABS
HOME
Button