Owner's Manual

34
35
StingerElectronics.com StingerElectronics.com
®
®
CAMERAS
DISPLAY OFF
Press the HOME BUTTON > Display Off
or Screen Off on the factory controls
to turn off the LCD display.
This is useful at night to prevent eye
fatigue.
Tap anywhere on the screen to return to
the regular display.
iGO NAVIGATION
To access the optional Navigation,
press the HOME BUTTON > Navigation
The User Manual for iGO Navigation can be
found on StingerElectronics.com
To add navigation, ask your dealer about
Stinger's pre-loaded iGO Navigation SD Card
(Part Number: SE-P14).
(OPTIONAL)
FIG. A
FIG. B
In addition to the factory rear
camera, HEIGH10 can support
up to four additional cameras.
To access any installed camera,
press the HOME BUTTON > Cameras
When a camera is rst activated,
there will be menu bars at the top and
bottom of the display. The top menu
bar contains the BACK arrow to return
to the previous screen, and the Off-
Road button will display the camera
image along with the off-road gauges
and information (FIG. A). Selecting
the Camera Settings button will open
up the Camera Settings menu (FIG. B).
The bottom menu bar displays avaiable
cameras. Touch any available camera
to switch camera views.
NOTE The top and bottom menu bars
will auto-hide after ve seconds, and
tapping the screen will re-display the
menu bars.
Camera Settings
The Camera Settings page displays all
enabled cameras. Cameras can be
shut off using the Trigger selection.