Owner's Manual

6
7
StingerElectronics.com StingerElectronics.com
®
®
GETTING STARTED
SELECTING A SOURCE
Back Arrow Exit
POWER UP!
With the vehicle ignition in the ON or
ACC position, Press and hold the knob
for 2 seconds to power ON/OFF.
The source will automatically default to
the last source used prior to powering
down.
You can adjust the audio volume at
start-up in Sound Settings on page 34.
The Information Bar is located at the
top of the screen. Depending on the
SOURCE, it will provide information
or content-sensitive controls. It also
displays temperature, time, phone
info and may contain BACK ARROW
and EXIT buttons.
Customizable TABS can be accessed by
swiping the up arrow  at the bottom
of the screen. Tabs give direct access to
sources/settings and can be customized
as shown on Page 8.
The active Tab will be highlighted, and
sources that are not available will be
dimmed out. Once the Tabs are opened,
they will auto-close after 5 seconds, or
press the down arrow
 to close the tabs.
There are multiple ways to scroll...
Swiping Up/Down, Up/Down Arrows
SETTING THE TIME
1) Touch and hold the Time Display
on the Information Bar for 2 seconds
to access the clock settings.
2) Swipe or click the arrows to set
time and format.
3) Touch the BACK ARROW or EXIT
to save and exit.
2
1
To select a source, press the HOME
button.
The HOME MENU displays all Sources,
along with Settings, Audio, Camera
and Vehicle options.
SOURCES that are not currently
available are dimmed out.


QUICK TIP
Information Bar
Source/Info
Temperature/
Time
Power
ON/OFF
Swipe Up
To Open TABS
HOME
Button
3