Owner's Manual

10
11
StingerElectronics.com StingerElectronics.com
®
®
Vehicle Info
Vehicle Info > Gauges
1 2 3
7
8
10 11
9
4
5
HOME BUTTON > Vehicle Info
Selecting Vehicle Info from the HOME Menu or Tabs will display information
and status for various vehicle systems.
To Change the Gauge Type:
Lightly tapping any gauge cycles
through the available gauge types.
Saving a Gauge Setup:
Press and hold either of the two Preset
buttons in the bottom corners to save
and later recall a gauge combination.
NOTE: To change the color of the
gauges, see Illumination Page 37
NOTE: To change the Units used for the
gauges, see Vehicle Settings on Page
15.
Available Gauge Types:
Battery Voltage
Oil Temperature
Oil Pressure
Transmission Temperature
Coolant Temperature
Fuel Pressure
Intake Air Temperature
Engine Calculated Load
Barometric Pressure
Intake Manifold
Fuel Pressure
Absolute Load
Ignition Timing
Engine Run Time
BACK - Return to the previous screen.
Vehicle Info Menu - Provides access
to various vehicle display modes. The
current mode will be highlighted.
User Settings - Access tire pressure,
camera and GPS options.
Tire Pressure - Provides tire pressure and
low pressure warnings. Low pressure
warnings can be customized in User
Settings.
Malfunction Indicator - Displays current
malfunction indicators. Touch the
indicator for more information.
Door Closed/Opened/Removed -
Indicates door, hood and rear gate
status.
Camera - Activates default camera.
Default camera can be set in User
Settings.
Transfer Case Status - Displays current
transfer case position.
GPS Coordinates - Displays GPS
information. Sensitivity can be adjusted
in User Settings.
Altitude - Displays altitude above/
below sea level.
Tire Angle - Displays front tire angle.
1
5
2
6
3
7
4
8
9
10
11
Selecting Gauges from the Vehicle Info Menu will display eight gauges that
can be user dened and saved.
6