Operation Manual

After Sales Support
Telephone: [phone]
Email: [e-mail]
13
Instructions (Cont.)
Multistage cooking
Some recipes may require more than one power level for cooking and/or
defrosting. Your oven can be set to change from one to another automatically,
for up to two cycles. The respective lights will appear on the menu action screen,
indicating which stage the oven is operating in. After the total time has elapsed,
beeps will sound to let you know that the program has finished.
Logically, Speed Defrost must precede any cooking function in a multistage
cooking program.
The following example shows the steps involved in setting up such a program.
Example: To set the oven for a speed defrost program followed by microwave
cooking:
• Place the food into the oven and close the door.
• Input a speed defrost program (see the instructions on page 12).
• Press the MULTISTAGE COOKING button.
• Input a microwave cooking program (power level, cooking time).
• Press the MENU/TIME dial to start.
• If required, input another microwave cooking program, perhaps with a lower
power level setting.
NOTE: Quick Start, Auto Cook and Weight Defrost cannot be set in a Multistage
cooking program.
Preset cooking (timer function)
The preset timer allows you to program the oven to start cooking at a later time.
NOTE: To use this preset timer, the clock must be set to the correct time.
Example: It is 11:10am now and you want the oven to start cooking at 11:30am:
• Place food into the oven and close the door.
• Set a cooking program (power level, cooking time and/or defrost program).
• Press the PRESET button.
• Turn the MENU/TIME dial to set the hour digit to 11.
• Press the PRESET button again.
• Turn the MENU/TIME dial to set the minute digit to 30.
• Press PRESET to confirm. The oven will start cooking at 11:30am.
• To cancel the preset timer, press PRESET, then press PAUSE/CANCEL.