Installation Guide

• Ensure light switch is OFF
• Screw MPI Light into lamp holder
1
3
5
4
2
• Plug in all Pod lights. Feel for ROUND ports
and stick plugs into ports
Do not plug lights
into USB port
CAUTION: Be careful not to
let the Pods fall to the ground
• Let all four
Pods hang
• Position the rst light in the desired area.
• Position ladder in that location
• Go up ladder with Pod. Be careful
• Find exact desired location on ceiling
Max length from hub is 9.5 feet
RECOMMENDED:
Position Pod minimum 3 feet
from surrounding wall.
• Unscrew the ceiling plate
counter-clockwise from the
Pod
• Place plate on ceiling and
mark holes
(5a) FINISHED CEILING:
• Drill hole using 3/16
(5mm) drill bit
• Insert supplied anchors
into hole
• If you hit a joists don’t use
anchors
OTHER MOUNTING LOCATIONS
Use discretion to mount to other surfaces such as
shelving, grid rack etc
WARNING: A poorly mounted light could fall, causing
damage to car/object/person. Mount securely or hire
a professional. Striker is not responsible for improper
installation
(5b) JOISTS:
• Position plate and
screw screws directly
into joists.
Do not use anchors
Striker Concepts | 704-508-1031 | info@StrikerConcepts.com | StrikerConcepts.com
INSTALLATION
x4