Manualshelf

User's Manual

ManualsBrandsSTL International ManualsElectronics433MHz Radio Transmitter
12345
Mode Button Functions
Common Operation
a. Press MODE button to active MODE functions
b. Press MODE button again to return to normal video viewing
c. Press M+/M- buttons to select functions
d. Press CH+/CH-, VOL+/VOL- to input parameters
Operation of individual functions
1. TV/Video : to select video input from either TV tuner or Video In
a. Press MODE button once to activate
b. Current input source: “TV” or “VIDEO” will be displayed on top right corner of screen
c. Press M+ button to go to Set 2.4G channel
d. Press M- button to go to Fine tune
e. Press VOL+ button to select TV input
f. Press VOL – button to select Video input
g. Press MODE again or timeout after 10 seconds turns off OSD and return to normal.
2. Set 2.4G channel : to change the channel of 2.4G transmitter to avoid interference
a. Current 2.4G channel displayed on top right corner
a. Press M+ button to go to Auto_Program
b. Press M-button to go to TV/Video
c. Press VOL+/VOL- to change 2.4G channel
d. Press MODE button or timeout after 10 seconds, disable OSD and return to normal
3. Auto_Program: to scan all available TV channels from RF tuner and store setting in EEPROM
a. Display “Auto Programming”
b. Press M+ button to go to Program_Memory
c. Press M-button to go to Set2.4G
d. Press V+ to select TV/CATV
e. Press CH+ button to start programming
f. After Auto Programming finished, first scanned channel is displayed
4. Program_Memory: to add or delete a channel in program memory
a. Display “Program Memory”
b. Press M+ button -> Fine_Tune
c. Press M- button -> Auto_Program
d. Press MODE button or timeout after 10 seconds, disable OSD and return to normal mode,
otherwise,
e. Press VOL+ to select Add Channel,
f. Press VOL- to select delete Channel,
To add a channel
g. Display on second line “Add Channel nnn”, nnn=current channel number
h. Display on bottom line “Press VOL+ button to confirm”
i. Press CH+ or CH- buttons to change channel to add
j. Press and hold CH+ or CH- buttons for 1 seconds to skip 10 channels in either direction
k. Display new channel number..