Datasheet

11/31
STE100P
13 RF Remote Fault function.
1: with remote fault function.
0R/W
12,11 --- Reserved
10 FC Flow Control function Ability.
1:supports PAUSE operation of flow control for full duplex link.
1R/W
9 T4 100BASE-T4 Ability.
Always 0: since STE100P doesn’t have 100BASE-T4 ability.
0RO
8 TXF 100Base-TX Full duplex Ability.
1: with 100Base-TX full duplex ability.
1R/W
7 TXH 100Base-TX Half duplex Ability.
1: with 100Base-TX ability.
1R/W
6 10F 10Base-T Full duplex Ability.
1: with 10Base-T full duplex ability.
1R/W
5 10H 10Base-T Half duplex Ability.
1: with 10Base-T ability.
1R/W
4~0 SF Select field. 00000 RO
PR5- ANLP, Auto-Negotiation Link Partner ability
15 LPNP Link partner Next Page ability.
0: link partner without next page ability.
1: link partner with next page ability.
0RO
14 LPACK Received Link Partner Acknowledge.
0: link code work had not received yet.
1: link partner successfully received STE100P’s Link Code
Word.
0RO
13 LPRF Link Partner’s Remote fault status.
0: no remote fault detected.
1: remote fault detected.
0RO
12,11 --- Reserved 0 RO
10 LPFC Link Partner’s Flow control ability.
0: link partner without PAUSE function ability.
1: link partner with PAUSE function full duplex link ability.
0RO
9 LPT4 Link Partner’s 100BASE-T4 ability.
0: link partner without 100BASE-T4 ability.
1: link partner with 100BASE-T4 ability.
0RO
8 LPTXF Link Partner’s 100Base-TX Full duplex ability.
0: link partner without 100Base-TX full duplex ability.
1: link partner with 100Base-TX full duplex ability.
0RO
7 LPTXH Link Partner’s 100Base-TX Half duplex ability.
0: link partner without 100Base-TX.
1: link partner with 100Base-TX ability.
0RO
6 LP10F Link Partner’s 10Base-T Full Duplex ability.
0: link partner without 10Base-T full duplex ability.
1: link partner with 10Base-T full duplex ability.
0RO
Table 5. Register Descriptions (continued)
Bit # Name Descriptions Default Val RW Type