User's Manual
Table Of Contents
- Table 1. Ordering information
- 1 Description
- 2 Features
- 3 Hardware and layout description
- 4 Bill of material
- 5 Federal Communications Commission (FCC) and Industry Canada (IC) compliance statements
- 6 Revision history
Features UM1761
6/19 DocID026283 Rev 2
2 Features
• ST95HF, a 13.56-MHz multi-protocol contactless transceiver IC with SPI serial access
communication:
• Reader mode
– ISO/IEC 14443 Type A
– ISO/IEC 15693
– ISO/IEC 18092
• Card Emulation mode:
– ISO/IEC 14443 Type A
• ISO/IEC 14443 Type A in Peer To Peer mode.
• 47 x 34 mm with 4 turn. 13.56 MHz inductive antenna etched on PCB and associated
tuning circuit.
• STM32F103RGT6 64LQFP 32-bits microcontroller, with 1Mbytes of Flash memory and
USB interface in a 64-pin LQFP package.
• KF33BDT, a 3.3V low dropout (LDO) voltage regulator
• USB mini B connector
• NX2016SA, a 27.12-MHz EXS00A-CS01188 crystal oscillator for ST95HF transceiver
• HC-49SD 8.000MHz 20pF/80ppm for STM32
• 20-pin JTAG connector for STM32 programming and debugging
• 2 push button (Reset & 180 degree rotation of the LCD screen)
• 1 joystick 4 directions + select
• 5 different color LEDs indicating the presence of RF field and protocol used for
communicating.
• JTAG connector for microcontroller firmware upgrade and debug.
• LCD color screen (320*200pixels).
• USB cable: Type A / mini B