Datasheet

AN3172 PFC coil specification
Doc ID 17230 Rev 1 27/31
8.1 Mechanical aspect and pin numbering
● Maximum height from PCB: 22 mm
● Coil former type: vertical, 6+6 Pins (Pins #1, 2, 4, 6, 7, 10, and 12 are removed)
● Pin distance: 3.81 mm
● Row distance: 25 mm
● External copper shield: not insulated, wound around the ferrite core and including the
coil former. Height is 8 mm. Connected to pin #3 by a soldered solid wire.
Figure 21. PFC coil mechanical aspect
Manufacturer:
● MAGNETICA, R. Volpini - Italy
● Inductor P/N: 1974.0002