Datasheet

ManualsBrandsSTMICROELECTRONICS ManualsLogic ICsLogic IC - Inverter Inverter 74HC DIP 14

1/8July 2001

■ HIGH SPEED:

= 8ns (TYP.) at V

= 6V

■ LOW POWER DISSIPATION:

= 1µA(MAX.) at T

=25°C

■ HIGH NOISE IMMUNITY:

NIH

= V

NIL

= 28 % V

(MIN.)

■ SYMMETRICAL OUTPUT IMPEDANCE:

| = I

= 4mA (MIN) at V

= 4.5V

■ BALANCED PROPAGATION DELAYS:

PLH

≅ t

PHL

■ WIDE OPERATING VOLTAGE RANGE:

(OPR) = 2V to 6V

■ PIN AND FUNCTION COMPATIBLE WITH

74 SERIES 04

DESCRIPTION

The M74HC04 is an high speed CMOS HEX

INVERTER fabricated with silicon gate C

MOS

technology.

The internal circuit is composed of 3 stages

including buffer output, which enables high noise

immunity and stable output.

All inputs are equipped with protection circuits

against static discharge and transient excess

voltage.

M74HC04

HEX INVERTER

PIN CONNECTION AND IEC LOGIC SYMBOLS

ORDER CODES

PACKAGE TUBE T & R

DIP M74HC04B1R

SOP M74HC04M1R M74HC04RM13TR

TSSOP M74HC04TTR

TSSOPDIP SOP

Summary of content (8 pages)

PAGE 1
M74HC04 HEX INVERTER ■ ■ ■ ■ ■ ■ ■ HIGH SPEED: tPD = 8ns (TYP.) at VCC = 6V LOW POWER DISSIPATION: ICC = 1µA(MAX.) at TA=25°C HIGH NOISE IMMUNITY: VNIH = V NIL = 28 % VCC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 4mA (MIN) at VCC = 4.5V BALANCED PROPAGATION DELAYS: tPLH ≅ tPHL WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 04 DESCRIPTION The M74HC04 is an high speed CMOS HEX INVERTER fabricated with silicon gate C2MOS technology.
PAGE 2
M74HC04 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL 1, 3, 5, 9, 11, 13 2, 4, 6, 8, 10, 12 7 NAME AND FUNCTION 1A to 6A Data Inputs 1Y to 6Y Data Outputs GND VCC Ground (0V) 14 Positive Supply Voltage TRUTH TABLE A Y L H H L ABSOLUTE MAXIMUM RATINGS Symbol VCC Parameter Supply Voltage Value Unit -0.5 to +7 V -0.5 to VCC + 0.5 -0.5 to VCC + 0.
PAGE 3
M74HC04 DC SPECIFICATIONS Test Condition Symbol VIH VIL VOH VOL II ICC Parameter High Level Input Voltage Low Level Input Voltage High Level Output Voltage Low Level Output Voltage Input Leakage Current Quiescent Supply Current Value TA = 25°C VCC (V) Min. 2.0 4.5 6.0 2.0 4.5 6.0 Typ. Max. 1.5 3.15 4.2 -40 to 85°C -55 to 125°C Min. Min. Max. 1.5 3.15 4.2 0.5 1.35 1.8 Max. 1.5 3.15 4.2 0.5 1.35 1.8 V 0.5 1.35 1.8 2.0 IO=-20 µA 1.9 2.0 1.9 1.9 4.5 IO=-20 µA 4.4 4.5 4.4 4.
PAGE 4
M74HC04 TEST CIRCUIT CL = 50pF or equivalent (includes jig and probe capacitance) RT = ZOUT of pulse generator (typically 50Ω) WAVEFORM : PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle) 4/8
PAGE 5
M74HC04 Plastic DIP-14 MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 1.39 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.
PAGE 6
M74HC04 SO-14 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.
PAGE 7
M74HC04 TSSOP14 MECHANICAL DATA mm. inch DIM. MIN. TYP A MAX. MIN. TYP. MAX. 1.2 A1 0.05 A2 0.8 b 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.9 5 5.1 0.193 0.197 0.201 E 6.2 6.4 6.6 0.244 0.252 0.260 E1 4.3 4.4 4.48 0.169 0.173 0.176 1 e 0.65 BSC K 0° L 0.45 A 0.60 0.0256 BSC 8° 0° 0.75 0.018 8° 0.024 0.
PAGE 8
M74HC04 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice.