Product Card

IO Bridge
Setting
(1)
Comment
PK2
SB39
ON PK2 may be used for the trace function TRACE_D5
OFF
PK2 is not connected to Trace
PK2 may be used for L
TDC_G7
PK5
SB49
ON PK5 may be used for the trace function TRACE_D6
OFF
PK5 is not connected to Trace
PK5 may be used for L
TDC_B6
PK6
SB35
ON PK6 may be used for the trace function TRACE_D7
OFF
PK6 is not connected to Trace
PK6 may be used for L
TDC_B7
PJ0
SB34
ON PJ0 may be used for the trace function TRACE_D8
OFF
PJ0 is not connected to Trace
PJ0 may be used for L
TDC_R1
PJ1 SB37
ON PJ1 may be used for the trace function TRACE_D9
OFF
PJ1 is not connected to Trace
PJ1 may be used for L
TDC_R2
PJ2 SB48
ON PJ2 may be used for the trace function TRACE_D10
OFF
PJ2 is not connected to Trace
PJ2 may be used for L
TDC_R3
PJ3 SB47
ON PJ3 may be used for the trace function TRACE_D11
OFF
PJ3 is not connected to Trace
PJ3 may be used for L
TDC_R4
PJ4 SB46
ON PJ4 may be used for the trace function TRACE_D12
OFF
PJ4 is not connected to Trace
PJ4 may be used for L
TDC_R5
PJ7 SB45
ON PJ7 may be used for the trace function TRACE_D13
OFF
PJ7 is not connected to Trace
PJ7 may be used for L
TDC_G0
PJ8 SB44
ON PJ8 may be used for the trace function TRACE_D14
OFF
PJ8 is not connected to Trace
PJ8 may be used for L
TDC_G1
PJ9 SB50
ON PJ9 may be used for the trace function TRACE_D15
OFF
PJ9 is not connected to Trace
PJ9 may be used for L
TDC_G2
1.
Default configuration is shown in bold
Figure 10 shows the TRACE Mictor-38 connector
UM2535
ETM TRACE Mictor-38 connector
UM2535 - Rev 2
page 18/59