User's Manual

UM2252
Board setup
DocID030806 Rev 2
7/26
2 Board setup
To set up the board;
1
Connect the X-NUCLEO-NFC05A1 expansion board to the STM32 Nucleo board
from the top through the Arduino
®
UNO R3 connectors
2
Power the STM32 Nucleo board using a Mini-B USB cable
3
Program the firmware on the STM32 Nucleo board using the provided example
4
Reset the MCU using the reset button available on the STM32 Nucleo board.
The evaluation kit is ready to be used.