Data Sheet

ManualsBrandsSTMicroelectronics ManualsDevelopment Kit Add-onsDevelopment board 1 pc(s)

NUCLEO-H755ZI-Q example. Boards with

different references show different

layouts. Picture is not contractual.

Features

• Common features

– STM32 microcontroller in LQFP144 package

– 3 user LEDs

– 2 user and reset push-buttons

– 32.768 kHz crystal oscillator

– Board connectors:

◦ SWD

◦ ST Zio expansion connector including Arduino

™

Uno V3

◦ ST morpho expansion connector

– Flexible power-supply options: ST-LINK, USB V

BUS

or external sources

– On-board ST-LINK debugger/programmer with USB re-enumeration

capability: mass storage, Virtual COM port and debug port

– Comprehensive free software libraries and examples available with the

STM32Cube MCU Package

– Support of a wide choice of Integrated Development Environments (IDEs)

including IAR

™

, Keil

and GCC-based IDEs

• Board-specific features

– External or internal SMPS to generate V

core

logic supply

– Ethernet compliant with IEEE-802.3-2002

– USB OTG full speed or device only

– Board connectors:

◦ USB with Micro-AB or USB Type-C

™

◦ Ethernet RJ45

– Arm

Mbed Enabled

™

compliant

Description

The STM32 Nucleo-144 boards provide an affordable and flexible way for users to try

out new concepts and build prototypes by choosing from the various combinations of

performance and power consumption features, provided by the STM32

microcontroller. For the compatible boards, the internal or external SMPS significantly

reduces power consumption in Run mode.

The ST Zio connector, which extends the Arduino

™

Uno V3 connectivity, and the ST

morpho headers provide an easy means of expanding the functionality of the Nucleo

open development platform with a wide choice of specialized shields.

The STM32 Nucleo-144 board does not require any separate probe as it integrates

the ST-LINK debugger/programmer.

The STM32 Nucleo-144 board comes with the STM32 comprehensive free software

libraries and examples available with the STM32Cube MCU Package.

Product status link

NUCLEO-XXXXZX

NUCLEO-F207ZG, NUCLEO-F303ZE,

NUCLEO-F412ZG, NUCLEO-F413ZH,

NUCLEO-F429ZI, NUCLEO-F439ZI,

NUCLEO-F446ZE, NUCLEO-F722ZE,

NUCLEO-F746ZG, NUCLEO-F756ZG,

NUCLEO-F767ZI, NUCLEO-H743ZI,

NUCLEO-H753ZI, NUCLEO-L496ZG,

NUCLEO-L4A6ZG, NUCLEO-L4R5ZI.

NUCLEO-XXXXZX-P

NUCLEO-L496ZG-P,

NUCLEO-L4R5ZI-P.

NUCLEO-XXXXZX-Q

NUCLEO-H745ZI-Q, NUCLEO-H755ZI-Q,

NUCLEO-L552ZE-Q.

STM32 Nucleo-144 boards

NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P

NUCLEO‑XXXXZX‑Q

Data brief

DB3171 - Rev 9 - April 2019

For further information contact your local STMicroelectronics sales office.

www.st.com

Downloaded from Arrow.com.

Summary of content (7 pages)

PAGE 1
NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Data brief STM32 Nucleo-144 boards Features • Common features – STM32 microcontroller in LQFP144 package – 3 user LEDs – 2 user and reset push-buttons – 32.768 kHz crystal oscillator – Board connectors: ◦ SWD – ◦ ST Zio expansion connector including Arduino™ Uno V3 ◦ ST morpho expansion connector Flexible power-supply options: ST-LINK, USB VBUS or external sources – NUCLEO-H755ZI-Q example. Boards with different references show different layouts.
PAGE 2
NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Ordering information 1 Ordering information To order an STM32 Nucleo-144 board, refer to Table 1. For a detailed description of each board, refer to its user manual on the product web page. Additional information is available from the datasheet and reference manual of the target STM32. Table 1.
PAGE 3
NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Ordering information Order code Board reference User manual NUCLEO-F756ZG NUCLEO-F767ZI STM32F756ZGT6U MB1137 UM1974 NUCLEO-H743ZI STM32H743ZIT6U MB1364 UM2407 NUCLEO-H753ZI STM32H753ZIT6U NUCLEO-H745ZI-Q STM32H745ZIT6U MB1363 UM2408 NUCLEO-H755ZI-Q STM32H755ZIT6U NUCLEO-L496ZG STM32L496ZGT6U NUCLEO-L496ZG-P NUCLEO-L4R5ZI NUCLEO-L4R5ZI-P DB3171 - Rev 9 Downloaded from Arrow.com.
PAGE 4
NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Product marking Order code NUCLEO-L552ZE-Q 1.1 Board reference MB1361 User manual UM2581 Target STM32 STM32L552ZET6QU Differentiating features • Device-only USB FS on USB Type-C™ connector • ST-LINK/V2-1 • Internal SMPS Product marking Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference design or in production. Any consequences deriving from such usage will not be at ST charge.
PAGE 5
NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Development environment 2 Development environment 2.1 System requirements • • Windows® OS (7, 8 and 10), Linux® 64-bit, or macOS® USB Type-A to Micro-B cable Note: macOS® is a trademark of Apple Inc. registered in the U.S. and other countries. 2.2 Development toolchains • Keil® MDK-ARM(1) • • IAR™ EWARM(1) GCC-based IDEs • Arm® Mbed™(2) online(3) (see mbed.org) Notes: 1. 2. 3. 2.3 On Windows® only.
PAGE 6
NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Revision history Table 3. Document revision history Date Version 15-Feb-2017 1 Changes Initial version. Document now scopes NUCLEO-L496ZG and NUCLEO-L496ZG-P products. Updated: 16-Mar-2017 2 • cover page features (to cover LL APIs) • cover page description • Table 2: Ordering information • Table 3: Codification explanation Document now also scopes NUCLEO-L4R5ZI product. Added Table 1: Device summary.
PAGE 7
NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.