Datasheet

ManualsBrandsSTMICROELECTRONICS ManualsDiodesTVS Diode

This is information on a product in full production.

April 2012 Doc ID 3068 Rev 7 1/9

P6KE

Transil™, transient voltage surge suppressor (TVS)

Datasheet − production data

Features

■ Peak pulse power: 600 W (10/1000 µs )

■ Stand-off voltage range 6.8 to 440 V

■ Unidirectional and bidirectional types

■ Low clamping factor

■ Fast response time

■ UL recognized

Complies with the following standards

■ IEC 61000-4-2 level 4

– 15 kV (air discharge)

– 8 kV (contact discharge)

■ MIL STD 883G, method 3015-7 Class 3

– HBM (human body model)

Description

Transil diodes provide high overvoltage protection

by clamping action. Their instantaneous response

to transient overvoltages makes them particularly

suited to protect voltage sensitive devices such as

MOS Technology and low voltage supplied IC’s.

TM:Transil is a trademarks of STMicroelectronics.

DO-15

(DO-204AC)

www.st.com

Summary of content (9 pages)

PAGE 1
P6KE Transil™, transient voltage surge suppressor (TVS) Datasheet − production data Features ■ Peak pulse power: 600 W (10/1000 µs ) ■ Stand-off voltage range 6.
PAGE 2
Characteristics P6KE 1 Characteristics Table 1.
PAGE 3
P6KE Characteristics Table 3. Electrical characteristics - values (Tamb = 25 °C) IRM @ VRM(1) VCL @ IPP 10/1000 µs VBR @ IR(2) Order code max min nom max Unidirectional Bidirectional µA V V V P6KE6V8A P6KE6V8CA 10 5.8 6.45 6.8 P6KE7V5A P6KE7V5CA 10 6.4 7.13 P6KE10A P6KE10CA 1 8.55 P6KE12A P6KE12CA 0.5 P6KE15A P6KE15CA P6KE18A V max mA VCL @ IPP 8/20µs αT(3) C(4) max max typ 10-4/ °C pF V A V A 7.14 10 10.5 57 13.4 298 5.7 4000 7.5 7.88 10 11.3 53 14.
PAGE 4
Characteristics Figure 3. P6KE Peak power dissipation vs. initial junction temperature (printed circuit board) % Figure 4. Peak pulse power vs. exponential pulse duration. Ppp (W) 100 80 60 40 20 Tj initialø(°C) 0 0 20 Figure 5. 40 60 80 100 120 140 160 180 200 Clamping voltage vs. peak pulse current(1) 0.001 Figure 6. VCL (V) % Ipp P6KE 440A 1 10 100 Capacitance vs. reverse applied voltage for unidirectional types (typical values).
PAGE 5
P6KE Characteristics Figure 9. 100 Transient thermal impedance junction to ambient vs. pulse duration Figure 10. Relative variation of leakage current vs. junction temperature Zth (j-a) (°C/W) Printed circuit board FR4, Llead = 10 mm 10 tp 1 0.01 0.
PAGE 6
Ordering information scheme 2 P6KE Ordering information scheme Figure 11. Ordering information scheme P6 KE 100 CA RL Peak Pulse Power P6 = 600 W Breakdown Voltage 100 = 100 V Types A = Unidirectional CA = Bidirectional Packaging Blank = Ammopack tape RL = Tape and reel 3 Package information ● Epoxy meets UL94, V0 ● Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance.
PAGE 7
P6KE Package information Table 5.
PAGE 8
Ordering information 4 P6KE Ordering information Table 6. Ordering information Order code Marking(1) Package Weight See Table 5 DO-15 0.4 g P6KExxxx P6KExxxxRL Base qty Delivery mode 1000 Ammopack 6000 Tape and reel 1. Logo, date code, type code, cathode band (for unidirectional types only). 5 Revision history Table 7. 8/9 Document revision history Date Revision Feb-2003 4A Changes Last update Oct-2004 5 1/ Note 5, figure 7 on page 4, updated from VBR > 220V to VBR ≥ 200V.
PAGE 9
P6KE Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.