Datasheet

The Ancillary Data extraction on STA013 can be
described as follow:
STA013 has a specific Ancillary Data buffer,
mapped into the I2C registers:
0x59 ANC_DATA_1
0x5A ANC_DATA_2
0x5B ANC_DATA_3
0x5C ANC_DATA_4
0x5D ANC_DATA_5
Since the content of Ancillary Data into an MPEG
Frame STA013 can extract is max. 56 bytes, a
specific register, to require the new 5 byte slot to
STA003 is needed.
This register is:
0x16 CMD_INTERRUPT
The interrupt register, is sensitive to any non-zero
value written by the Microcontroller. When this
register is updated the Ancillary Data buffer is
filled up with new values and the registers
0x41 ANCCOUNT_L
0x42 ANCCOUNT_H
are updated (decremented) accordingly.
5.3. I/O CELL DESCRIPTION
1) CMOS Tristate Output Pad Buffer
, 4mA, with Slew Rate Control / Pin numbers 9, 10, 11, 20, 28
EN
A
D98AU904
Z
OUTPUT PIN MAX LOAD
Z 100pF
2) CMOS Bidir Pad Buffer
, 4mA, with Slew Rate Control / Pin numbers 3, 12
EN
A
D98AU905
ZI
IO
OUTPUT
PIN
CAPACITANCE
OUTPUT
PIN
MAX
LOAD
IO 5pF IO 100pF
3) CMOS Inpud Pad Buffer
/ Pin numbers 4, 5, 6, 8, 21, 25
A
D98AU906
Z
INPUT PIN CAPACITANCE
A 3.5pF
4) CMOS Inpud Pad Buffer with Active Pull-Up
/ Pin numbers 7, 24, 26
A
D98AU907
Z
INPUT PIN CAPACITANCE
A 3.5pF
STA013 - STA013B - STA013T
28/38