Datasheet

Revision history STCC2540
32/33 DocID024711 Rev 5
9 Revision history
Table 8. Document revision history
Date Revision Changes
29-May-2013 1 Initial release.
24-Jun-2013 2
Updated Features on page 1 (added “CB” components).
Updated Section 1: Functional description (replaced
1000 MHz by 1100 MHz).
Updated Table 2 (added note 3.).
Updated Table 4 (updated parameters and conditions for
│I
REVERSE
│,
IEN, IOL(FAULT),
I
CTLx,
I
OL(CHARGING
)
, added
typ. value for X
TALK,
O
IRR, and
B
w,
removed t
PD
and t
SK
symbols).
Added Figure 4 on page 12.
Added Note: in Section 5.1: Supported modes.
Added Section 5.8: Input and output capacitors.
Added Section 6: Typical operating characteristics.
06-Dec-2013 3
Updated Table 4 (updated min. conditions for I
OS
-
R
ILIM
96 kandR
ILIM
33 k).
Updated Table 5 (updated Host state column, added
footnote 1. and 2.below table).
Updated Section 5.7 (replaced equation by Equation 1 to
Equation 3).
Minor modifications throughout document.
06-Jan-2014 4
Corrected units in Table 4 on page 8 (replaced “W” by “
“ in R
DISCHARGE
, R
ON
andR
DCP_RES
symbols).
08-Jan-2014 5
Updated Section : Features on page 1 (removed “2.5 A”
from “Integrated V
BUS
power switch with low R
ON
of 65
m“ replaced “2.5 A” by “2.8 A (max.)” in “Adjustable
current limit”
Added List of figures on page 3.
Updated Section 1: Functional description on page 4
[replaced “2.5 A” by “2.8 A (max.)”].
Updated Table 4 on page 8 (added “R
ILIM
= 17.2 k“ and
typ. conditions of “R
ILIM
= 17.2 k“ for I
OS
symbol).
Updated Section : Current limit programming on page 17
[replaced “2.5 A (typ.)” by “2.8 A (max.)”].