Datasheet

DC and AC parameters STM6510
14/26 Doc ID 16788 Rev 2
4 DC and AC parameters
This section summarizes the operating measurement conditions, and the DC and AC
characteristics of the device. The parameters in the Table 6: DC and AC characteristics that
follow, are derived from tests performed under the Measurement Conditions summarized in
Table 5: Operating and measurement conditions. Designers should check that the operating
conditions in their circuit match the operating conditions when relying on the quoted
parameters.
Figure 11. AC testing input/output waveforms
Table 5. Operating and measurement conditions
Parameter Value Unit
V
CC
supply voltage 1.0 to 5.5 V
Ambient operating temperature (T
A
) –40 to +85 °C
Input rise and fall times ≤
5ns
Input pulse voltages 0.2 to 0.8 V
CC
V
Input and output timing ref. voltages 0.3 to 0.7 V
CC
V
0.8 V
CC
0.2 V
CC
0.7 V
CC
0.3 V
CC
AM00478