Datasheet

ManualsBrandsSTMICROELECTRONICS ManualsRectifiersRectifier Array Case type TO-262-3

This is information on a product in full production.

October 2014 DocID8563 Rev 3 1/8

STPS15L30C

Low drop power Schottky rectifier

Datasheet - production data

Features

• Very small conduction losses

• Negligible switching losses

• Extremely fast switching

• Low forward voltage drop

• Low capacitance

• Low thermal resistance

• Avalanche specification

• ECOPACK

2 compliant component for DPAK

on demand

Description

Dual center tab Schottky rectifier suited for

switched mode power supply and high frequency

DC to DC converters.

Packaged in DPAK, this device is intended for use

in low voltage, high frequency inverters, free-

wheeling and polarity protection applications.

$

'3$.

$

$

Table 1. Device summary

Symbol Value

F(AV)

2 x 7.5 A

RRM

30 V

150 °C

(typ) 0.34 V

www.st.com

Summary of content (8 pages)

PAGE 1
STPS15L30C Low drop power Schottky rectifier Datasheet - production data Description $ Dual center tab Schottky rectifier suited for switched mode power supply and high frequency DC to DC converters. . $ Packaged in DPAK, this device is intended for use in low voltage, high frequency inverters, freewheeling and polarity protection applications. . . $ Table 1. Device summary $ $ $ '3$. Features Symbol Value IF(AV) 2 x 7.5 A VRRM 30 V Tj 150 °C VF (typ) 0.
PAGE 2
Characteristics 1 STPS15L30C Characteristics Table 2. Absolute ratings (limiting values per diode at 25 °C unless otherwise stated) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 30 V IF(RMS) Forward rms current 10 A IF(AV) Average forward current, δ = 0.5, square wave Tc = 140 °C(1) IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 75 A PARM Repetitive peak avalanche power tp = 10 µs, Tj = 125 °C 200 W -65 to +175 °C 150 °C Tstg 7.
PAGE 3
STPS15L30C Characteristics Figure 1. Average forward power dissipation versus average forward current (per diode) Figure 2. Average forward current versus ambient temperature (δ = 0.5)(per diode) 3 ) DY : , ) DY $ į į į į 7 į WS 7 WS į WS 7 Figure 3.
PAGE 4
Characteristics STPS15L30C Figure 7. Forward voltage drop versus forward current (per diode) Figure 8.
PAGE 5
STPS15L30C 2 Package Information Package Information • Epoxy meets UL94,V0 • Cooling method: by conduction (C) In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 9.
PAGE 6
Package Information STPS15L30C Table 5. DPAK dimension values Dimensions Ref. Millimeters Min. Typ. Inches Max. Min. Typ. Max. A 2.18 2.40 0.085 0.094 A1 0.90 1.1 0.035 0.043 A2 0.03 0.23 0.001 0.01 b 0.64 0.90 0.025 0.035 b4 4.95 5.46 0.195 0.215 c 0.46 0.61 0.018 0.024 c2 0.46 0.60 0.018 0.024 D 5.97 6.22 0.235 0.245 D1 5.10 E 6.35 E1 4.32 e1 4.4 4.7 0.173 0.185 H 9.35 10.40 0.368 0.407 L 1.0 1.78 0.039 0.070 0.201 6.73 0.250 0.
PAGE 7
STPS15L30C 3 Ordering Information Ordering Information Table 6. Ordering information 4 Order code Marking Package Weight Base qty Delivery mode STPS15L30CB S15L30C DPAK 0.30 g 75 Tube STPS15L30CB-TR S15L30C DPAK 0.30 g 2500 Tape and reel Revision history Table 7. Document revision history Date Revision Description of Changes 14-Jun-2012 2 Automatic revalidation date workflow started. 21-Oct-2014 3 Updated DPAK package information and reformatted to current standard.
PAGE 8
STPS15L30C IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.