Datasheet
DocID11542 Rev 7 3/18
TSV321, TSV358, TSV324 Absolute maximum ratings and operating conditions
18
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltages values, except differential voltage are with respect to network terminal.
7
VV
id
Differential input voltage
(2)
2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. If
V
id
> ±1 V, the maximum input current must not exceed ±1 mA. When V
id
> ±1 V, an input series resistor
must be added to limit input current.
±1
V
in
Input voltage V
DD
-0.3 to V
CC
+0.3
T
stg
Storage temperature -65 to +150
°C
T
j
Maximum junction temperature 150
R
thja
Thermal resistance junction-to-ambient
(3)
SOT23-5
SO8
MiniSO8
TSSOP8
SO14
TSSOP14
3. Short-circuits can cause excessive heating and destructive dissipation. R
th
are typical values.
250
125
190
120
105
100
°C/W
R
thjc
Thermal resistance junction-to-case
(3)
SOT23-5
SO8
MiniSO8
TSSOP8
SO14
TSSOP14
81
40
39
37
31
32
ESD
HBM: human body model
(4)
4. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
2kV
MM: machine model
(5)
5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin
combinations with other pins floating.
200 V
CDM: charged device model
(6)
6. Charged device model: all pins plus package are charged together to the specified voltage and then
discharged directly to ground.
1.5 kV
Latch-up immunity 200 mA
Lead temperature (soldering, 10 s) 250 °C
Output short-circuit duration See
(7)
7. Short-circuits from the output to V
CC
can cause excessive heating. The maximum output current is
approximately 80 mA, independent of the magnitude of V
CC
. Destructive dissipation can result from
simultaneous short-circuits on all amplifiers.